7000 series
1 / 11ページ

PANEL SWITCHES 7000 series Rocker and paddle switches DISTINCTIVE FEATURES Wide variety of actuators and terminals Many mounting styles for panel or PCB 4 contact materials 8 electrical functions, maintained or momentary UL and CSA approved - for VDE, refer to 57000 ELECTRICAL SPECIFICATIONS • Current/voltage rating with resistive load : Contact Silver, gold plated AD 4 A 30 VDC Gold plating withstands up to 100 mA 30 VDC Brass, gold plated CD * For details, see "Technical information“ on website. • For inductive, lamp or capacitive loads, consult factory. • Initial contact resistance : 10 mΩ • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 1,000 Vrms 50 Hz min. between terminals 1,500 Vrms 50 Hz min. between poles 1,500 Vrms 50 Hz min. between terminals and frame • Contact bounce : 2 ms max. • Electrical life : 50,000 cycles at full load GENERAL SPECIFICATIONS • Low level or mechanical life : 100,000 cycles • Panel thickness : 1 (.039) to 2.5 mm(.098) • Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) The company reserves the right to change speci

Rocker and paddle switches ELECTRICAL FUNCTIONS • Case : diallylphthalate (DAP) or high temperature plastic material (UL94-V0) • Actuator : polyamide • Housing : stainless steel or steel tin plated • Bracket : steel, tin plated 1 • Contacts : A : silver AD : silver, gold plated CD : brass, gold plated X601 : brass, silver plated AGENCY APPROVALS 3 A 250 VAC 6 A 125 VAC For VDE, refer to 57000 series. Availability : consult factory for details of approved models. Marking : to order switches marked UL or CSA, complete appropriate box of ordering format. • Terminal seal : epoxy APEM products...

Rocker and paddle switches With or without bezel U1200 With small rocker U730 or small paddle U700 With medium rocker U620 or medium paddle U610 With small rocker U730 or small paddle U700 With medium rocker U620 or medium paddle U610 With large rocker U1010 PANEL SWITCHES

PANEL SWITCHES 7000 series Rocker and paddle switches BUILD YOUR PART NUMBER BASIC PART NUMBER Single pole Double pole Solder lugs or straight PC depending on model Right angle, horizontal mounting (7900 switches) Consult factory for three and four pole models. Bracket mounting (7000 switches) MOUNTING PLATE ELECTRICAL FUNCTIONS Right angle terminals or straight PC terminals with bracket Straight PC or quick-connect terminals, 4.7 (.185) terminal spacing, snap-in mounting Solder lug terminals, snap-in mounting Solder lug terminals, panel mounting Straight PC or quick-connect terminals, 4.7...

Rocker and paddle switches CONTACT MATERIALS Silver, gold plated Brass, gold plated SPECIAL OPTIONS Silver plated brass contacts AGENCY APPROVALS No sealing Epoxy sealed terminals Availability : Consult factory for details of approved models. For VDE, refer to 57000. BEZELS FOR ROCKER U730 OR PADDLE U700 BEZELS MOUNTING ACCESSORIES ACCESSORIES FOR PANEL MOUNTING MODELS Spacer + nut + screw Spacer + nut + screw + washer ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that...

Rocker and paddle switches Shown with rocker U730 and bezel U1200 * Function 4 : SP in DP case, specify CT or TH connections, see “Technical information“ on website. 6 Single pole Shown with rocker U530 PANEL MOUNTING - LARGE ACTUATOR STRAIGHT PC TERMINALS : 7900 PANEL MOUNTING - LARGE ACTUATOR SOLDER LUG TERMINALS : 7700 III 2-3 Single pole Double pole 5-6 7736 7746 ON Double pole SNAP-IN MOUNTING - STRAIGHT PC TERMINALS SPACING 4.7 (.185) : 7200 Single pole III 2-3 Single pole Double pole 5-6 7636 7646 ON SNAP-IN MOUNTING SOLDER LUG TERMINALS : 7600 PANEL SWITCHES

Rocker and paddle switches RIGHT ANGLE TERMINALS - HORIZONTAL SINGLE POLE RIGHT ANGLE TERMINALS - HORIZONTAL III II DOUBLE POLE Double pole Single pole PANEL MOUNTING - MEDIUM ACTUATOR STRAIGHT PC TERMINALS : 7900N III 2-3 Single pole Double pole 5-6 7736N 7746N ON Shown with rocker U620 PANEL MOUNTING - MEDIUM ACTUATOR SOLDER LUG TERMINALS : 7700N * Function 4 : SP in DP case, specify CT or TH connections, see “Technical information“ on website. ** Functions 2 and 8 : standard connection (CT) shown on drawing - reversed connection available. Consult factory. 7 PANEL SWITCHES

Rocker and paddle switches Shown with rocker U620 SHORT BRACKET - WIDTH 15.75 (.620) SINGLE POLE : 7030Y SHORT BRACKET - WIDTH 15.75 (.620) - DOUBLE POLE : 7040Y Double pole Single pole SHORT BRACKET - WIDTH 19.05 (.750) : 7000Y6 III 2-3 5-6 ON PANEL SWITCHES * Function 4 : SP in DP case, specify CT or TH connections, see “Technical information“ on website.

Rocker and paddle switches CONTACT MATERIALS BASIC P/N Silver Silver, gold plated Brass, gold plated No sealing Epoxy sealed terminals SPECIAL OPTIONS BASIC P/N Blank No special requirement X601 Silver plated brass contacts Current voltage rating for an electrical life of 20,000 cycles : 0.5 A 30 VDC Minimum quantity : 5,000 pieces per model and shipment. AGENCY APPROVALS BASIC P/N All standard models All standard models No agency approval required. Availability Consult factory for details of approved combinations or options. Marking To order switches marked UL or CSA, complete above box...

Rocker and paddle switches For actuator color, replace last "0" by number : 1 Blue 1/4 Dark blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 Ivory 7/1 White 9 Orange U1010 Large rocker For 7900W, available on DP only. PANEL SWITCHES

Rocker and paddle switches BEZELS FOR PADDLE U700 AND ROCKER U730 For bezels color, replace last "0" by number : 1 Blue 1/4 Dark blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 Ivory 7/1 White 9 Orange STANDARD PANEL MOUNTING Panel thickness with bezel 1 to 2.5 mm (.039 to .098) U543 Spacers, screws and nuts U1022 Spacers, screws, nut and washers PANEL SWITCHES