カタログ >
APEM GmbH >
Q10 series

Q10 series
1 / 4ページ

カタログの抜粋

Ø10 mm panel mount LED indicators DISTINCTIVE FEATURES 5 mm flush diffused LED, standard, hyper bright or water clear Flush chamfered bezel style (200 mm long) wire terminations Available in RGB ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating & Storage Temperature Range: -40 °C to +85° C ( -40 °F to +185 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 60° (dependant on model) • Life Expectancy: 100,000 hours • Torque: 20 to 25 cNm • Maximum panel thickness 7 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Stainless Steel 316L or Anodized Aluminium with potted rear end The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be con

カタログの1ページ目を開く

Ø10 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Operating Voltage Operating Current (Min to Max) Forward Voltage * Customer to supply resistor for desired operating current. Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. leds, by connecting the gold solder lug (+) one color is produced, by reversing the supply voltage another...

カタログの2ページ目を開く

Ø10 mm panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL STYLE BEZEL FINISH Metal Rear epoxy Wires Stainless Steel Anodized Flush Dark olive Fixed Light Super Bright Green Super Bright Yellow Super Bright Blue Super Bright White Super Bright Orange Hyper Bright Green Hyper Bright Yellow Red/Yellow Green/Yellow Hyper Bright Orange ** please refer to the forward voltage in electrical specifications Common cathode Common anode * Common anode only ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Standard and Bi-Colour are...

カタログの3ページ目を開く

Ø10 mm panel mount LED indicators FLUSH BEZEL REAR EPOXY WIRES E ALL DIMENSIONS IN MM THIRD ANGLE PROJECTION DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE STATED: 1 DEC PLACE: ± 0.2 2 DEC PLACE: ± 0.1 3 DEC PLACE: ± 0.05 ANGULAR: ± 0.5 DEG INSPECTION DIMENSION C CRITICAL DIMENSION IF IN DOUBT, ASK ENGINEERING! MATERIAL: UNIT A, GOODS IN GATE A/B | MOORSIDE ROAD | WINCHESTER | SO23 7US | UK COPYRIGHT © OF APEM COMPONENTS LTD. Any unauthorised distribution or disclosure is strictly prohibited unless with permission of the author

カタログの4ページ目を開く