カタログ >
APEM GmbH >
Q22 series

Q22 series
1 / 9ページ

カタログの抜粋

Q22 series Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Available in RGB ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating & Storage Temperature Range: Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F) Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 30–100° (dependant on model) • Life Expectancy: 100,000 hours • Torque: 75 cNm • Maximum panel thickness: 12 mm (Prominent & Recessed), 10 mm (Flush & Chamfered) • Insulation resistance : 4,000 MΩ at 500 VDC The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal a

カタログの1ページ目を開く

Ø22 mm panel mount LED indicators • Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body. REAR EPOXY WIRES FOR RGB OPTION M22 x 1.0 THREAD BLACK ANODE +VE RED CATHODE -VE GREEN CATHODE -VE BLUE CATHODE -VE ELECTRICAL SPECIFICATIONS STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Operating Voltage Operating Current (Min to Max) Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green...

カタログの2ページ目を開く

Ø22 mm panel mount LED indicators BUILD YOUR PART NUMBER BEZEL STYLE MOUNTING HOLE Rear epoxy Pins Rear epoxy Wires Short body Pins Short body Wires BEZEL FINISH Metal Anodized Flush Bright Chrome Satin Grey Stainless Steel * Bezel finish: Option “S” only available in Chamfer bezel style Fixed Light Flashing Light (only 12 VDC) Super Bright Green Super Bright Yellow Red/Yellow/ Green Red/Green/ Blue* * Terminals option 5 and common anode only Daisy Chain Lamp Test *** Available in single color only. Common cathode Common anode ** please refer to the forward voltage in electrical...

カタログの3ページ目を開く

Q22 series Ø22 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

カタログの4ページ目を開く

Ø22 mm panel mount LED indicators FLUSH BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

カタログの5ページ目を開く

Q22 series Ø22 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES SHORT BODY WIRES REAR EPOXY PINS

カタログの6ページ目を開く

Ø22 mm panel mount LED indicators CHAMFER BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES SHORT BODY WIRES REAR EPOXY PINS (316L STAINLESS STEEL AND ANODIZED ALUMINIUM ONLY)

カタログの7ページ目を開く

Q22 series Ø22 mm panel mount LED indicators CUSTOM ENGRAVING Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied. Suffix the part number with legend code :

カタログの8ページ目を開く

Ø22 mm panel mount LED indicators SECRET UNTIL LIT POLYCARBONATE INSERTS Some common codes are listed above, for your custom requirements please contact APEM. Please note Secret until lit inserts only available with flush metal bezel (Option F) Suffix the part number with legend code : CABLE LENGTH AND CONNECTOR For custom cable length and connectors contact APEM.

カタログの9ページ目を開く