カタログ >
APEM GmbH >
Q30 Series

Q30 Series
1 / 3ページ

カタログの抜粋

Ø30mm panel mount LED indicators DISTINCTIVE FEATURES 23.2mm coloured Fresnel lens 200 mm long wire terminations Rear epoxy sealed ENVIRONMENTAL SPECIFICATIONS • Above panel sealing tested to IP67 & IP69K • Operating & Storage Temperature Range: Operating temperature: -40 °C to +85 °C (–40 °F to +185 °F) Storage temperature: -40 °C to +100 °C (–40 °F to +212 °F) GENERAL SPECIFICATIONS • Operating voltage: 12 to 24Vac/dc • Current consumption: 30 mA (nominal across operating voltage range) • Reverse voltage protection: the indicator has no polarity • Over-voltage protection: activates at 36 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Maximum panel thickness: 9 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Stainless steel 316L body, PC lens, Nitrile o-ring MOUNTING • Mounting torque: 75cNm/0.75Nm

カタログの1ページ目を開く

Ø30 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS LED COMPONENT SPECIFICATIONS Typical intensity (mcd) Red Forward Voltage (Vac/dc) ADDITIONNAL INFORMATION ON LED COMPONENTS • The operating voltage must not be exceeded by more than 20% as this will result in reduced life expectancy. • Luminous intensity is measured at 30mA unless otherwise stated. • Recommended usage: - Standard: Homogenous light output that is good for indoor applications. - Hyper Bright: Homogenous light output that is good for outside viewing and is daylight visible. - Super Bright: A water clear LED that is...

カタログの2ページ目を開く

Ø30 mm panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL STYLE BEZEL FINISH Rear epoxy Wires Fixed Light Stainless Steel ABOUT THIS SERIES • Standard and Bi-Colour are provided in Standard wire length is 200mm, 24AWG UL1061, Red wire denotes anode (+), Black wire denotes cathode (-) for other lengths consult APEM. 3

カタログの3ページ目を開く