カタログ >
Canarm AgSystems >
Manual Variable Speed Controls

Manual Variable Speed Controls
1 / 1ページ

カタログの抜粋

CONTROLS & THERMOSTATS TWO SPEED CONTROL TS15 CONTROL • Manual control for 2 speed fans. • High/low/off SPDT switch. • For dry locations. • 15 Amp rating at 115V; 10 Amp rating at 230V MANUAL VARIABLE SPEED CONTROLS MC CONTROLS Great for use on AX, SD, DFRC and AXC fans! • Minimum speed adjustment screw. • Designed to fit a standard 3” x 5” electrical box. • Mount in a dry location. • Now available in 230V/1/60HZ. • Ideal for use on variable speed SD Standard Exhaust fans, AX, DFRC and AXC fans (not for use with single speed motors). MSC-4 VARIABLE SPEED CONTROL • One variable speed output (12.5 A at 120/230 VAC general purpose resistive, 9 FLA at 120/230 VAC PSC motor) • Adjustable high/low settings. • ON/OFF switch. • May also be used as a light dimmer to power up to five, 250 Watt brooder lamps. • 115 or 230V AC operation. • Overload protection fuse (15 Amp 250V AC). • Rugged enclosure (corrosion and water resistant and fire retardant). AUTOMATIC VARIABLE SPEED CONTROL MTC-4C MODULATING TEMPERATURE CONTROL • The control will automatically vary the speed of the fan to hold the set temperature. • One variable stage (10 A general-purpose (resistive) load at 120/230VAC, 7 FLA at 120/230VAC, PSC motor) • Two control knobs, one for set temperature, one for adjusting the minimum speed. • Continues to run at minimum speed or change the internal shunt to have the fan turn off at minimum speed setting. • 2°F off set-back for auto shut off. • 6°F temperature differential. • One foot temperature probe. • 115 or 230V AC operation. • Adjustable 40 - 90˚F temperature set point. • Overload protection fuse (15A, 250

カタログの1ページ目を開く