Chaff Cutters
1 / 3ページ

カタログの抜粋

POWER REQUIREMENT ** POWER UNIT ELECTRIC MOTOR CONNECTION STYLE NUMBER OF FIXED KNIFE COMPENSATION SIZE *** LENGTH WORKING POSITION) HEIGHT WORKING POSITION) WIDTH WORKING POSITION) WEIGHT (WITHOUT MOTOR) LOADING MEASUREMENTS * Operator may vary according to experience. ** PTO / MOTOR SPINDLE are output values. *** Average values. Depending on the type of product and the moisture content of the product

カタログの1ページ目を開く

CAPACITY * POWER REQUIREMENT ** 5 – 7.5 tons/h (10-12 tons/hr USING conveyor feeding) 20 - 25 kW 5 – 7.5 tons/h (10-12 tons/hr USING conveyor feeding) 20 - 25 kW 5 – 7.5 tons/h (10-12 tons/hr USING conveyor feeding) 20 - 25 kW POWER UNIT a) TRACTOR b) DIESEL ENGINE c) ELECTRIC MOTOR a) DIESEL ENGINE b) ELECTRIC MOTOR POWER UNIT CONNECTION TYPE 3 POINT SWITCH SYSTEM a) TRACTOR TOWING HOOK b) FIXED c) HAMMER HOOK d) FIXED a-b) FIXED (UNIVERSAL MOTOR TABLE) ELECTRIC ENGINE AND PULLEY RECOMMENDATION COMPENSATION SIZE *** WHEEL MEASURING THREE POINT HANGERS LENGTH WORKING POSITION HEIGHT WORKING...

カタログの2ページ目を開く

POWER REQUIREMENT ** POWER UNIT ELECTRIC MOTOR CONNECTION STYLE NUMBER OF FIXED KNIFE COMPENSATION SIZE *** WHEEL MEASURING Number of wheels THREE POINT HANGERS LENGTH WORKING POSITION) HEIGHT WORKING POSITION) WIDTH WORKING POSITION) WEIGHT (WITHOUT MOTOR) LOADING MEASUREMENTS * Operator may vary according to experience. ** PTO / MOTOR SPINDLE are output values. *** Average values. Depending on the type of product and the moisture content of the product LOADING: LENGTH: 1100 mm WIDTH: 550 mm HEIGHT: 900 mm

カタログの3ページ目を開く