AIRONE
1 / 9ページ

Via Industriale, 23 – 25028 – Verolanuova (BS) ITALY VAT: IT-02894400981 TEL. (+39) 0306585725 – info@deleks.com WWW.DELEKS.

(Wheeler Dealers)

AIRONE HYDRAULIC HEDGE CUTTER AIRONE Hedge cutter has been engineered for clearing overgrowth from highway medians and for initial land clearing for housing, parks and recreational areas. The AIRONE is ideal for semi professional use, pruning roadside and tra ic island hedges, however can also be used for parks, green spaces, gardens, ditches, dykes, and inclines in general. The hedge cutter itself is powered by a PTO shaft (supplied with the machine) and can be used with all 20-60HP compact tractors e.g Kubota, John Deere 2-3, Ford, McCormick, Iseki, Yanmar, Lamborghini, Goldoni. Minimum...

CUTTING HEADS Precision made in Italy, made by a company based in Brescia which has been dealing with this products for over ifty years and only this. But what makes it superior it’s the attention to the details on the area of the crank, so there is a much stronger wheel but it also has a very high spec spring and at the very end of the crank there is an high precision, industrial rod end bearing, but also the pin has been made in a high precision way so that there is no chatter, there is no vibration, but also any of these shock loads are removed so this is going to last in the ield much...

BENEFITS & FEATURES • Hydraulic distributor: Hydrocontrol (Made in Italy). • Double hydraulic pump: Casappa (Made in Italy) allows to move together the arm and the mower. • Hydraulic motor (mower): Casappa (Made in Italy). • Hydraulic controller is supplied with the Hedgecutter. accommodate for any kind of gradient of terrain. If the tractor is on slope the arm will steady itself to reduce downtime. • The lightweight design allows its use on lat ground or on verges. • 55 liters oil tank (already supplied level: Shell Tellus 46 S2 MX 46).