DEWULF ZK
1 / 8ページ

{{requestButtons}}

カタログの抜粋

DEWULF ZK - 1

2- OR 3-ROW SELF-PROPELLED TOP LIFTING HARVESTER

カタログの1ページ目を開く
DEWULF ZK - 2

REVOLUTIONARY IN ITS CLASS As carrot grower or agricultural contractor, you are faced daily with ever stricter requirements, that are placed upon you by the consumer. The marketing of quality products and the ability to deliver these on time is of crucial importance to ensure that the competition do not get the upper hand. In order to meet the high expectations placed upon you, you expect the same from your carrot harvester. You need a RELIABLE machine that can withstand the toughest of conditions, and in the most ECONOMICAL way. No other harvester can exceed these expectations like a...

カタログの2ページ目を開く
DEWULF ZK - 3

A PERFECT TOPPING RESULT STARTS WITH THE INTAKE An accurate cutting result depends very much on the moment when the carrots can be harvested. For this, the carrots have to be suspended uniformly and accurately in the harvesting belt unit. The ‘Floating Shares’ are unique, in that each harvesting element has an independent depth control for its harvesting share, whereby maximum stability is guaranteed, even at higher harvesting speeds. Small up-and-down movements of the harvesting element do not have any influence on the position of the share arms. HARVESTING BELTS With the super-grip...

カタログの3ページ目を開く
DEWULF ZK - 4

DEWULF ZKIIS DEWULF ZKIISE The ZKIIS harvester is a 2-row self-propelled top lifting harvester. Depending on the Also with the ZKIISE, a 2-row self-propelled top lifting harvester with hedgehog unit, you logistics, it is possible to harvest 3 - 4 hectares a day under all circumstances and with are able to harvest 3 - 4 hectares a day. After the cutters set, the product is transported by a quality end product. After the cutters set, the product is transported by a 800 mm wide a 800 mm wide cross conveyor. Thanks to the huge hedgehog unit, you have a completely cross conveyor into the...

カタログの4ページ目を開く
DEWULF ZK - 5

DEWULF ZKIIISE GENTLE CROP HANDLING The ZKIIISE is a 3-row self-propelled top lifting harvester with hedgehog unit which The 1200 mm wide discharge elevator combines power and efficiency to deliver a quality end product. With the ZKIIISE, you are is your guarantee for unprecedented able to harvest 4 - 5 hectares a day. After the cutters set, the product is transported by a 800 mm wide cross conveyor. Thanks to the huge hedgehog unit, you have a completely discharge elevator is placed in such a clean product straight from the field. At the end of the discharge conveyor is a distributor way...

カタログの5ページ目を開く
DEWULF ZK - 6

THE HEART OF A DEWULF TOP LIFTING HARVESTER Dewulf harvesters are equipped with the best cutters sets in the market. Whenever moving parts are exposed to dirt and liquid, excessive wear will be the result. That is why Dewulf ensures the bearings of each cutters sets hermetically sealed through a ‘Labyrinth Sealing’. This provides the highest degree of durability in the market, whereby even the smallest dust particles and aggressive plant fluids cannot gain access to the bearings. Routine maintenance is kept to a minimum. Two lubrication nipples per bearing housing lubricate all bearings...

カタログの6ページ目を開く
DEWULF ZK - 7

HEDGEHOG UNIT HYDRAULICALLY DRIVEN ROLLERS The hedgehog unit removes earth from the crop and the If you are confronted with stony conditions, Dewulf has 1 roller below each cutters set (to avoid loss of carrots) rest of the earth from the product flow. In order to meet created an optional protective feature with a spring + 1 entrance roller of the haulm cover (to avoid haulm a variety of conditions, this can be adjusted in inclination between the share arm and the chassis. accumulation on the frame of the cross conveyor. An and speed. The large contact surface area (1000x1680 mm) optional...

カタログの7ページ目を開く
DEWULF ZK - 8

Share arm protection Cutters Length harvesting belts [mm] 6-cutter set with flat cutters, each bearing housing has two lubrication nipples and labyrinth sealing. Hydraulically driven, synchronisation of the cutters is ensured by a closed gearbox. Automatic greasing system for cutters set Hydraulically driven rollers: 1 below each cutter set + 1 entrance roller of the haulm cover Hydraulically driven entrance roller of the cross conveyor 2 hydraulically driven rotary torpedoes per element DPC (Dewulf Position Control) DSC (Dewulf Synchronisation Control) ADC (Automatic Depth Control) DAS...

カタログの8ページ目を開く

Dewulf Groupのすべてのカタログと技術パンフレット

  1. DEWULF ENDURO

    16 ページ

  2. DEWULF ZKIV

    8 ページ

  3. CP CUP PLANTERS

    12 ページ

  4. DEWULF KWATRO

    12 ページ

  5. DEWULF R3060

    16 ページ

  6. DEWULF R2060

    12 ページ

  7. DEWULF TORRO

    8 ページ

  8. DEWULF GK

    8 ページ

  9. DEWULF GB

    8 ページ

  10. DEWULF P3

    8 ページ

  11. DEWULF SC

    8 ページ