1500
1 / 6ページ

Mechanical control lever Its body is made of aluminium Push-pull cable exits at 90 degrees with respect to the lever. It is used for the command of gears, stabilizers, lawn movers, cutting machines and hydraulic distributors in general. FLEXBALL I T A L I A N A WR CONTROLS GROUP to mount side by side for multi axles applications • Possibility Cable’s stroke: 16 mm • 450 N maximum+/–working load • Available with several options • Tuning of the stroke and their combination: • Anti reversal • Locking function •

1500 MECHANICAL CONTROL LEVER > 2 di 6 TUNING OF THE END OF STROKE To modify the end of stroke, it is necessary to remove the two black plastic covers and tune the screws placed inside. Two screws regulate indipendently the forward and reverse lever’s stroke. To increase the stroke, rotate the screw clockwise; to reduce the stroke, rotate the screw counter clockwise. Maximum stroke is +/– 16 mm. Black plastic covers Black plastic covers SPACERS Levers series 1500 are available with or without spacers. Spacers are necessary for multi axle applications. MULTI-AXLE KIT Rods with different...

1500 MECHANICAL CONTROL LEVER > 3 di 6 ANTI-REVERSAL FUNCTION The lever can be moved only in one direction, depending on how is mounted the anti-reversal device. As shown in the pictures here below, in mounting case “A” the lever can just move forwards while in mounting case “B” the lever can just move reverse. Lever 1500 can be ordered already with the anti-reversal built-in function. Alternatively it is possible to implement anti-reversal function on a standard 1500 lever by ordering the anti-reversal kit. The code for such a kit is 0-1500.06.01.00. Spacers Lunette Detent Spacers Screw A...

1500 MECHANICAL CONTROL LEVER > 4 di 6 LOCK FUNCTION Depending on the position of the locking device, the lever can be freely moved (case A) or it is locked in the central position (case B). Lever 1500 can be ordered already with the lock function. Alternatively it is possible to implement the lock function on a standard 1500 lever by ordering the locking kit. The code for such a kit is 0-1500.06.00.00. Detent Screw A Spacers Screw B MOUNTING OF THE LOCK DEVICE 1. Loosen screws A and B 2. Insert the detent in its housing 3. Position the spacers onto the holes inside the body and mount the...

1500 MECHANICAL CONTROL LEVER > 5 di 6 CODES It follows the list of the codes for control lever series 1500 in different versions. Spacers Lever’s stick length End of stroke Without end of stroke With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function With anti-reversal function With lock function 180 With end of stroke...

1500 MECHANICAL CONTROL LEVER > 6 di 6 PUSH-PULL CABLES WHICH FIT WITH LEVER 1500 LEVER SIDE end fittings are • The represented with the cable Cable type 07E, code 971630*mmmmm Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 info@flexballitaliana.com www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP HYDRAULIC DISTRIBUTOR SIDE