GRAIN DRYERS FULL AUTOMATION OF THE BATCH CYCLE The electric version of Pedrotti dryers can reach a high level of complete automation with the feature "Mastermatic". It includes the automatic stop at the end of the batch cycle; the start of the unloading through a motorized flap and the restarting of the new load once completed the unloading of the product. The system allows in an easy and very understandable way even to set the definitive stopping of the machine after a pre-selected number of batches. The control panel and the settings can be controlled easily through a modern PLC unit, whose TOUCH SCREEN display is perfectly integrated in the control panel of the machine. HEAT SAVING COMBUSTION CHAMBER FUNNELS Pedrotti uses special designed combustion chamber funnels to ensure that each calorie produced by the burners goes directly inside the crop, without any heat waste. The air coming from the fan divides in two different flowlines, producing a natural isolation of each internal chamber funnel. No heat dispersion means fuel saving. The outside of the funnel remains always cold, and the user can touch it with bare hands FULL HOT-DIP GALVANIZATION This hot-galvanized frame is an addition to all the other components that we already supply with hot galvanizing (pipe and basin of the loading screw, pipes of the middle vertical screw and others). This Pedrotti frame is COMPLETELY GALVANIZED, not just assembled with several galvanized parts. This means true quality PEDROTTI LARGE 270 TECHNICAL DATA BATCH CAPACITY AVERAGE DAILY OUTPUT 24h in tons Oil seed rape from 14% to 9% 165 POWER REQUIRED Model Pto drive - Tractor min. size of HP 80 or single electric drive motor 45 kW (60 HP) Diesel, Automatic twin stage (Gas as option) Caloric power Kcal/h max. 950.000 E-mail: [email protected] GRAIN DRYERS FULL HOT-DIP GALVANIZED

GRAIN DRYERS GALVANIZED CENTRAL AUGERS ADJUSTABLE COLLARS The galvanized collar on centre auger tube consents to suit different crops and moistures very easily. Lifting it up or down it is possible to adjust it according to your specific needs. GALVANIZED AUGERS TUBES Pedrotti uses for its augers tubes, a Carbon steel thickness before being fully galvanized. By total galvanization, we give an additional thickness of 1 mm and therefore a longer life. ULTRA-STRONG TOOTHED GEARS Pedrotti uses ultra-strong internal gears and agitators to resist the extreme strain produced by a high level of moisture...