DITEGO
1 / 2ページ

カタログの抜粋

DITEGO COMBI TRACTION SWITCH The unique DITEGO combi traction switch combines all the main tiller head functions in one unit: Besides the • Integration of the tiller head functions travel, horn, lifting/lowering and body protection switch typical traction switch functions (travel speed and travel • Non-contacting Hall-effect technology for all functions direction), it also includes the horn button and the body • CANopen interface protection switch as well as digital lifting/lowering. The • 6 mm square shaft; the shaft length can be specified DITEGO is used in the TEMO RIDER tiller head and also lends itself to customer-specific tiller head solutions. by the customer • Protection class: IP 68 • Ideal for the design of customer-specific tiller heads Subject to change without notice | Version of 12 21 Gebrüder Frei GmbH & Co. KG 72461 Albsta

カタログの1ページ目を開く

Technical data Technology Mechanical data Dimensions Mechanical angle of rotation Actuation Cable and plug-in connector Electrical data Voltage supply (Ub) Power consumption Interface / protocol Operating conditions Operating temperature range Max. actuation force Service life Emergency reverse button Throttle axis Raise / lower Horn Vibration test / shock EMC Protection class according to EN 60529 Contactless via Hall sensors See technical drawing ± 45° Square axle of size 6 x 6 mm AMP Superseal 6-pos., 1.5 Series (282108-01) +9 V ... +40 VDC 50 mA CAN / CANopen -30°C ...+63°C 12 Nm Order...

カタログの2ページ目を開く