Specialists by tradition, innovators by vocation Primary tillage

EXPERTS IN CULTIVATING We apply our experience and provide the highest quality in our entire range of machinery for an optimal soil preparation. GUARANTEE OF EXCELENCE Our agricultural machinery is synonymous with quality. We have succeeded in turning countless barren lands into fields suitable for cultivation. TECHNICAL ADVICE Our professionals provide customized solutions based on the study and the characteristics of the soil, optimizing the crops. INNOVATION IN AGRICULTURE Thanks to the constant contact with agricultural professionals, we have a wide range of products that satisfy the most...

JYMPA started in 1971, in a small metallurgical workshop in Castellserà (Lleida, Spain), a little town situated in an agricultural and rural environment. The close contact with farmers led us to know their concerns to create machines that meet their needs. This resulted in the development of the first subsoiler for deep soil decompaction. Gradually, this initial design was optimized to facilitate soil penetration, incorporate improvements and increase reliability. Over the years, the range of subsoilers has expanded to meet all the needs of soils, crops and farmers on all continents. This experience...

ANTARES 6 RIGEL 8 Check our range on the web SPICA 10 SIRIUS 12 POLARIS 14 MINTAKA 16 ALASIA 18

Fixed subsoiler with V-shaped chassis The ANTARES subsoiler has a very robust construction, to perform a deep work and decompact the soil efficiently and reliably. It is the original model with V-shaped chassis developed by JYMPA 50 years ago, pioneer in incorporating the height adjustment of the arms, improved and optimized to better penetrate the ground with the least resistance to advance. The wide range of models and optional equipment covers all the needs. “Great robustness and resistance” Cultivated land 45 - 80 cm depth (depending on model) Model ANTARES-9-SR50-PC with cast steel boots...

ANTARES Technical data Accessories Optional: - single roller ∅ 580 mm - double roller ∅ 520 mm Steel S355J depth adjustable arms Boron steel points Working depth Approximate weight Width with double roller Arms spacing Width with single roller Arms section Width without roller Distribution folded arms Required power Hitch category Models with hydraulic folding also incorporate non-return valves with flow regulators and anti-opening security system. Model ANTARES-7 with double roller ∅520 mm Supporting stand Central hydr. Central hydr. Central hydr. Models with hydraulic folding. When folded,...

Fixed subsoiler with 2V-shaped chassis The RIGEL subsoiler is the natural evolution of the original ANTARES model, for working on land with stubble or a lot of plant debris on the ground surface. Its arms are distributed in two V-shaped chassis, so that there is a greater distance between the arms and a subsoiler with 3, 4, 5 or 6 rows of arms is obtained, with less resistance to the advance, saving fuel consumption and no clogging. “Save consumption and doesn’t get clogged” Cultivated land Model RIGEL-7-2V-550-PL with cast steel boots and double roller ∅ 580 mm 70 - 80 cm depth (depending on...

RIGEL Technical data Accessories Optional: - simple roller ∅ 580 mm - double roller ∅ 520 mm Arms bolts Steel S355J depth adjustable arms Boron steel points Supporting stand Blades Model RIGEL-5R-2V with double roller ∅ 520 mm Models with hydraulic folding also incorporate non-return valves with flow regulators and anti-opening security system. Approximate weight Hitch category Working depth Arms spacing Width with double roller Arms section Width with single roller Width without roller Distribution folded arms Required power Model RIGEL-9-2V-PC with simple roller ∅ 580 mm Lateral hydr. Lateral...

Subsoiler with hydraulic safety system The SPICA subsoiler is designed to work in rocky, difficult and demanding soils. The hydraulic cylinders retract, causing the arms to lift in the event of any obstacle such as stones or deep roots that prevent the subsoiler from advancing, and automatically return to their working position once the obstacle has been overcome. In this way, the subsoiler and the tractor are protected against possible snagging, performing non-stop work. “For lands with stones

SPICA Technical data Nitrogen accumulator with adjustable pressure Optional: - simple roller ø 580 mm - double roller ø 520mm Hydraulic cylinders Boron steel points Model SPICA-7 with double roller ∅ 580 mm Approximate weight Hitch category Working depth Arms spacing Width with double roller Arms section Width with single roller Width without roller Distribution folded arms Required power Models with hydraulic folding also incorporate non-return valves with flow regulators and anti-opening security system. Hidr. lateral Models with hydraulic folding. When folded, their total width is less than...

Subsoiler with mechanical security system The SIRIUS subsoiler with two rows of arms is the most advanced variant of the RIGEL subsoiler, for fast and deep work in areas with a lot of stubble or plant debris, where a high clearance is required to avoid clogging. “Machine with great versatility” Each arm has a mechanical fuse that provides extra safety for the tractor and the machine against possible hookings. Mechanical security system Model SIRIUS-9R-PC with mechanically adjustable double roller ∅ 520 mm

SIRIUS Technical data Safety bolts Swinging bolts Supporting stand Double roller ∅ 520 mm mechanically adjustable Boron steel points Double roller ∅ 520 mm mechanically or hydraulically adjustable Double roller ∅ 520 mm hydraulically adjustable Model SIRIUS-5R with double ∅ 520 mm with mechanical regulation Distribution folded arms Width without roller Width with roller Working depth Arms section Hitch category Approximate weight Arms spacing Required power Models with hydraulic folding also incorporate non-return valves with flow regulators and anti-opening security system. Central hydr. Models...