M155 Self-Propelled Windrower
1 / 294ページ

Parts Catalog 214296 Revision A Original Instruction

M155 Self-Propelled Windrower, featuring the Dual Direction® and Ultra Glide® suspension. Published May, 2017 NOTE: Keep your MacDon publications up-to-date. The most current version can be downloaded from our website (www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required). Chinese and Russian translations of this manual can be ordered from MacDon, downloaded from the MacDon Dealer Portal (https://portal.macdon.com) (login required), or downloaded from the MacDon international website (http://www.macdon.com/world).

Introduction This Parts Catalog lists all the replacement parts that can be ordered for a MacDon M155 Self-Propelled Windrower. Bold text is used to indicate updates made at the current revision level. With each new revision of the catalog, previous revisions are returned to regular text. In this catalog, right-hand (RH) and left-hand (LH) are determined from the operator’s position, facing forward with the windrower in cab-forward position. An arrow is sometimes used in illustrations to indicate cab-forward position as shown below.

The side of the serial number on which the dash (-) appears determines whether the part is used "up to" or "after" the serial number given. Example: • -162249 Used on machines up to and including serial number 166249. • 166250- Used on machines including and after serial number 166250.

Abbreviations The following abbreviations are used in this catalog. A/R – as required (quantity varies) ASSY – assembly C/W – complete with CSK – countersink DK – double knife DT – distorted thread EXT – exterior FLG – flange HH – hex head HYD – hydraulic I.D. – inside diameter LH – left hand (determined from operator's position, facing forward) NC – national coarse thread NF – national fine thread NSS – not serviced separately O.D. – outside diameter OPT – optional RD – round REF – reference, part number called up elsewhere in catalog REG – regular RH – right hand (determined from...

This list covers changes made since the last revision (147958 Rev. A)

1 Frame Hose Guards

FRAME HOSE GUARDS Part Number MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) Serial Number

WHEEL LEGS Part Number KIT – LEG PIN EXTRACTION TOOL (DEALER SET–UP AID) 1 WASHER – FLAT Serial Number 1. Kits available through Whole Goods only.

Part Number BUMPER – RUBBER COVER – SOFTEX GRIP GUARD – FOAM RUBBER ASSY – STIRRUP LATCH RAIL – WELD'T BUMPER – RUBBER STEP – WELD'T (2011 AND FORWARD) PLATE – LATCH MOUNT RAIL – FRONT WELDT, LH RAIL – FRONT WELDT, RH

PLATFORM MECHANISM Part Number BUSHING – TEFLON SUPPORT – HINGE, PLATFORM BUSHING – BRONZE SUPPORT – PLATFORM, WELD'T LINK – PLATFORM TUBE – HINGE ANGLE – PLATFORM ARM PIVOT LINK – STRIKER WASHER – FLAT

WALKING BEAM 2. Includes fitting (MD #18671), two bushing sleeves (MD #107201), and decal (MD #23165). 3. Includes two bushings (MD #161226), decal (MD#109842), and reflectors (MD #115145, 115147). 5. Model year 2014 and prior only.

Part Number ARM – ANTI SHIMMY MACHINED BRACKET – LH SHOCK MOUNT BRACKET – RH SHOCK MOUNT DAMPENER – ANTI SHIMMY WASHER – HARDENED FLAT WASHER – FORMED

Part Number CASTER – WELDMENT, C/W DECAL SHAFT – WELDMENT STEM – TIRE VALVE ASSEMBLY #TR – 415 RING – RETAINING BEARING – ASSEMBLY BEARING – BALL FITTING – LUBE BOLT – WHEEL (PRESS-IN) 9/16 NF X 53 LG Serial Number WASHER – HARDENED FLAT 6. Kits available through Whole Goo

Part Number CASTER – LH WELDT, C/W DECAL CASTER – RH WELDT, C/W DECAL TUBE – INNER TIRE HUB – C/W BEARING CUPS AND GREASE FITTING BEARING – CONE BEARING – CONE ROLLER SEAL – GREASE FITTING – LUBE, DRIVE TYPE WASHER – HARDENED FLAT Serial Number WASHER – FLAT 7. Kits available through W

Part Number CASTER – WELDMENT, C/W DECAL SHAFT – WELDMENT BEARING – ASSEMBLY BEARING – BALL SPH O.D C/W LC 1 3/8 IN. BORE RING – RETAINING STEM – TIRE VALVE ASSEMBLY #TR – 415 BOLT – WHEEL (PRESS-IN) 9/16 NF X 53 LG WASHER – HARDENED FLAT Serial Number 8. Kits available through Whole Goods only. 9. For units without anti-shimmy

Part Number CASTER – LH WELDT, C/W DECAL CASTER – RH WELDT, C/W DECAL HUB – C/W BEARING CUPS AND GREASE FITTING BEARING – CONE BEARING – CONE ROLLER SEAL – GREASE FITTING – LUBE, DRIVE TYPE STEM – TIRE VALVE ASSEMBLY #TR – 415 WASHER – HARDENED FLAT Serial Number WASHER – FLAT 10. Kits available through Whole Goods only. 11. For units without ant

Drive Wheels and Tires – Eight Bolt

DRIVE WHEELS AND TIRES - EIGHT BOLT 12. Kits available through Whole Goods only. 13. Not serviced individually; service with kit MD #166729. 14. Kit replaces any previous nut for the eight-bolt configuration to eliminate any possible bolt loosening. Includes: 16 nuts (A), 16 washers (B), decals, and instructions.

DRIVE WHEELS AND TIRES – EIGHT BOLT

DRIVE WHEELS AND TIRES - EIGHT BOLT 15. Kits available through Whole Goods only. 16. Not serviced individually; service with kit MD #166729. 17. Kit replaces any previous nut for the eight-bolt configuration to eliminate any possible bolt loosening. Includes: 16 nuts (A), 16 washers (B), decals, and instructions.

12 Drive Wheels and Tires – Ten Bolt

DRIVE WHEELS AND TIRES – TEN BOLT Part Number STEM – VALVE (METAL) WHEEL – 26DW-16L C/W DECALS AND VALVE STEMS (REVERSIBLE) STEM – VALVE (METAL) PLUG – VALVE STEM SPUD – WHEEL KIT – DRIVE TIRES, TURF 23.1-26 18 PLUG – WHEEL KIT – DRIVE TIRES, TURF 18.4-26 18 WHEEL – 26DW-16L C/W DECALS AND VALVE STEMS (REVERSIBLE) STEM – VALVE (METAL) PLUG – VALVE STEM SPUD – WHEEL Serial Number 18. Kits available through Whole Goods only. 19. Not serviced individually; nut (MD #205397) must be ordered in mult