R5 Rotator
1 / 4ページ

カタログの抜粋

The R5 is part of the Nelson Rotator® family of sprinklers.

is a completely different micro sprinkler. • Uniform distribution • Greater throw radius • Better soil infiltration • Low pressure operation • Reliable start up Rotator® Technology Plate Standard Nozzle Nozzle (Standard): #35 Orange #40 Blue #45 Purple #50 Green #55 Yellow #9836-XXX* Plate: Green = 1 Wine = 2 Blue = 3 Handy Pocket Guide SAVE WATER, SAVE ENERGY and do a better job of irrigating. rotator® technology FULL COVERAGE IRRIGATION FOR TREE & VINE CROPS — the facts. Copyright © 2008 Nelson Irrigation Corporation Flow Control Nozzle quick thread connect to FT-02, FT-03 feedtube...

カタログの2ページ目を開く

These versatile stake mounting options feature durable, UV and kink resistant flexible PVC tubing. Fast, simple installation. See the Nelson Rotator® Feedtube Assemblies brochure for further details. y2 pvc-4 for 4 mm Tubing Female Acme x R5 Adapter #10616 PVC Stake Adapter (Gray) #11258 1/2" PVC Pipe 4 mm Tubing Options1 1/2 PVC-4 Stake and Tube Assembly Options

カタログの3ページ目を開く

‘Always use the recommended pressure for each nozzle/plate combination. The absence of flow data on the above chart for a particular plate/nozzle combination indicates the pressure is outside the recommended range. FILTRATION & NOZZLE CLEANING NOTE: 75 mesh or finer filtration is suggested. The plate and nozzle of the R5 should not be removed. Any attempt to do so will likely cause permanent damage. Nelson 5FC Flow Control Nozzle The R5 is available with a standard or flow control nozzle. The 5FC nozzles illustrated below are operating at the I same flow. As pressure increases, 5FC nozzles...

カタログの4ページ目を開く