Dust Extraction System
1 / 2ページ

お気に入りに追加する

{{requestButtons}}

カタログの抜粋

Dust Extraction System for Intake Pits The purpose of the PETKUS Dust Extraction System for Intake Pits is Construction: to minimize the dust during the filling of the intake pits. The Dust Extraction System for the Intake Pits is installed in modules. Every module is equipped with a fan and exhaust silencer for aspirating Advantages: the air. Bag filters made of polyester clean the air inside the module. Individual and independent modules The modules can be extended from 8 m to 18 m. Optionally extendable Large filter areas with high airflow Standard Equipment: Immediate installation on or next to the intake pit Bolted housing made of galvanized sheet steel A dust collection system is not required Fan with exhaust silencer Description: The dusty air which is created during grain unloading is aspirated by Options: the fans of the intake pit Dust Extraction System. A bag filter separates Model in galvanized sheet steel the dust and the cleaned air is returned into the room. The bag filter is cleaned with compressed air and the dust is guided to the intake pit. Therefore, a dust collection system is not required. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E

カタログの1ページ目を開く

Dust Extraction System for Intake Pits Size of one modul: 2 m (optional 500 or 1 000 mm) Pressure for pneumatical filter cleaning: 6-7 bar Intake pit aspiration system Length Air volume Filter area Electrical power fan Electrical power, inclusive compressor Air pressure volume Electrical power, compressor Technical alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-m

カタログの2ページ目を開く

PETKUS Technologie GmbHのすべてのカタログと技術パンフレット

1. 

   Pendulum Bucket Elevator PB 400

   2 ページ

2. 

   Optical sorter OS T roeber

   3 ページ

3. 

   Universal Cleaner F 12 / P 12

   2 ページ

4. 

   Pre-Cleaner V 12 / V 15

   2 ページ

5. 

   PETKUS K-Series

   3 ページ

6. 

   Universal Cleaner U 12 / U 15

   2 ページ

7. 

   Indented Cylinder ZK / ZL

   2 ページ

8. 

   Continuous Flow Dryer DW

   2 ページ

9. 

   Gravity Table G f-series

   2 ページ

10. 

    Gravity Table Type G 20

    2 ページ

11. 

    Gravity Tables Type G 30 / G 40

    2 ページ

12. 

    Buffer Silo Type VS

    2 ページ

13. 

    Smooth Wall Silo GWS

    2 ページ

14. 

    Profile Wall Silo Type PWS

    2 ページ

15. 

    Troughed Chain Conveyor Type TK 400 / TK 520

    2 ページ

16. 

    Trough Chain Conveyor Type TK 200 / TK 300

    2 ページ

17. 

    Trough Belt Conveyor MB 300 / MB 400

    2 ページ

18. 

    Bucket Elevator Type BE 370 / BE 660 / BE 900

    2 ページ

19. 

    Bucket Elevator Type BE 130 / BE 180 / BE 280

    2 ページ

20. 

    Bucket Elevator Type BE 100

    2 ページ

21. 

    Continuous Flow Dryer DWU

    2 ページ

22. 

    SE 03

    2 ページ

23. 

    Storage and Buffer Silo

    2 ページ

24. 

    Smooth Wall Silo

    2 ページ

25. 

    Wall Silo PWS

    2 ページ

26. 

    MultiCoater CM 100

    2 ページ

27. 

    Chemical Mixer Type 200

    1 ページ

28. 

    Continuous Flow Dryer DD

    2 ページ

29. 

    Indented Cylinder ZA

    2 ページ

30. 

    A-cleaner

    2 ページ