GIANTMIX FT
1 / 2ページ

カタログの抜粋

2 tapered roller bearing to absorb the axial forces Mechanical seals SiC/SiC, independent of rotation direction Interim bearings for the drive shaft (slide bearings) Technical Data 3-blade high efficiency propeller, dynamically balanced Tube Ø 159 x 5 mm, ss304 inclusive robust tube within tube technology Sealing plate 120 x 120 cm (143 x 143), ss304 ss316 on request Sound pressure level 75 dB(A) Installation up to 8 m below subtrate level, other immersion depths on request Oil inspection glass for monitoring the tightness Agitator completely manufactured in modular design Option: power take-off with protection for alternative operation with tractor (max. HD+ 700) Adjustment range POM protection to minimize abrasion Lateral adjustment ± 30° through handspindle Tilt adjustment up to ± 30° through hydraulic cylinder 800 x 800 mm (plate 120 cm) 1,000 x 1,000 mm (plate 143 cm) Ex-Zone 2 (outside tank) and Zone 1 (inside tank) Special design FT4 13.5 kW for Zone 1 (outside) 400 V, 50 Hz, special voltages on request Tank openings: Classification mechanical components: C E II 2G Ex h IIA T3 Gb PTC thermistors 160°C (overheat protection) Ex-Motor E II 3G Ex nA IIA T3 Gc Special design 13.5 kW: E II 2G Ex eb IIA T3 Gb Control switch (optional) Planetary gear, helical teeth, low noise level Soft start or frequency converter Delivery without connecting cable Own oil circuit gear oil SAE85W-140 / API GL-5 Oil change all 2,000 operating hours Option: rain protection hood (ss

カタログの1ページ目を開く

Gear reduction ratio Pumping rate water [m3/min] Subject to technical changes * measured in water and 1.2 m distance © SUMA Rührtechnik GmbH | Martinszeller Str. 21 | DE-87477 Sulzberg As per: 2020-06 Phone: +49 8376 / 92131 - 0 | Fax: - 19 | info@suma.de | www.suma.de/en

カタログの2ページ目を開く

GIANTMIX FT 1 / 2ページ

カタログの抜粋

SUMA Rührtechnikのすべてのカタログと技術パンフレット

GIANTMIX FT
1 / 2ページ