カタログの抜粋
• ultiple functions in one attachment to save time and money M including dozing, clamming, leveling, and bottom dumping. • uarded two-cylinder design. G • ” bore, 8 3⁄8” stroke cylinders, and NitroSteel® cylinder rods. 2 • Greasable 1 9⁄16” diameter hinge pins and 1 ¼” diameter cylinder pins. • 5⁄8” x 6” reversible, replaceable bolt-on edge at rear of clam and front of dozer. • ” x 6” weld-on cutting edge with holes to accept ¾ optional edges (see page 3). OPTION: HOLDING VALVE Increases the holding force of the hydraulic cylinders. Works with all Virnig Multi-Purpose Buckets. Specifications and designs are subject to change without notice.
カタログの1ページ目を開く
Additional Info • 1 9/16" diameter hinge pins. • 2" bore, 8 3/8" stroke cylinders with 1 1/4" NitroSteel® cylinder rods and 1 1/4" cylinder pins. • Hoses from bucket to loader and couplers included. Specifications and designs are subject to change without notice.
カタログの2ページ目を開く
V50 MULTI-PURPOSE BUCKET EDGE OPTIONS STANDARD BOLT-ON EDGE • Extends life of bucket edge. • eversible 5⁄8ˮx 8ˮ bolt-on wear edge with 5⁄8ˮ holes spaced 6ˮ on center. R • vailable on all Virnig Buckets except skeleton style, unless noted. A SERRATED BOLT-ON EDGE • Excellent alternative to toothbar for chiseling and breaking up compacted soil. • ingle bevel, ¾ˮx 8ˮ, serrated bolt-on edge with 5⁄8ˮ holes spaced 6ˮ on center. S • vailable on all Virnig Buckets except skeleton style, unless noted. A TOOTHBAR OVER WELD-ON • nstallation is simple ensuring that breaking up compacted soil I is no...
カタログの3ページ目を開くVirnigmfgのすべてのカタログと技術パンフレット
-
U-BLADE /TILLER1 ページ
-
V70 DRUM MULCHER2 ページ
-
V40 SKELETON GRAPPLE1 ページ
-
TRENCHER2 ページ
-
POWER RAKE2 ページ
-
BALE FORK8 ページ
-
V50 AUGER DRIVE3 ページ
-
V40 AUGER DRIVE3 ページ
-
AUGER BITS1 ページ
-
CONCRETE BUCKET2 ページ
-
V40 Angle Snow Blade2 ページ
-
Tiller2 ページ
