Exhibit with us
*myagriexpo  
English
  1. Catalogs
  2. Ace Pump Corporation
  3. FMC-75-HYD

FMC-75-HYD

FMC-75-HYD
1 / 2 PagesView full catalog

FMC-75-HYD

Product catalog summary
Specifications:
  • Suction: 1 inch, Discharge: 3/4 inch
  • Motor Requirements: 204 motor requires 4 GPM (15.1 LPM) hydraulic flow; 206 motor requires 7 GPM (26.75 LPM) hydraulic flow
  • Bypass Capacity: Integral Needle Valve bypasses up to 9 GPM (34 LPM) on Open Center Systems
  • Seal Options: Standard Viton® Carbon/Ceramic or Optional Severe Duty Silicon Carbide Mechanical Seal
  • Construction: Polypropylene Corrosion Resistant with Stainless Steel Shaft and Hardware
  • Maximum Shutoff Pressure: 100 PSI
  • Maximum Fluid Temperature: 140°F
Performance Chart:
  • Oil Flow Rates: 4.8, 4.3, 3.6, 2.8 GPM
  • Conversion to LPM: 18.2, 16.3, 13.6, 10.6
  • Note: Performance data is for the pump with a 204 motor
Operational Warnings:
  • Do Not Run Dry: Running dry will damage the seal and potentially the impeller
  • Do Not Run With Flow Shutoff: Extended periods without flow can cause excessive heat and pump failure; a continuous bypass is recommended for low flow applications
Dimensions:
  • Various dimensions provided in inches and millimeters for different parts of the pump
Parts List:
  • Detailed list of parts with reference numbers, part numbers, descriptions, and quantities required
  • Includes repair kits for different series and components
See more

Catalog excerpts

FMC-75-HYD-1

Polypropylene Hydraulic Motor Driven Centrifugal Pump FMC-75-HYD • Suction 1” Discharge 3/4” -204 motor requires 4 GPM (15.1 LPM) hydraulic flow on PC Closed and Open Center Systems -206 motor requires 7 GPM (26.75 LPM) hydraulic flow on LS Closed and Open Center Systems • Integral Needle Valve bypasses up to 9 GPM (34 LPM) on Open Center Systems • Standard Viton® Carbon/Ceramic or Optional Severe Duty Silicon Carbide Mechanical Seal • Polypropylene Corrosion Resistant Construction • Stainless Steel Shaft and Hardware Maximum Shutoff Pressure 100 PSI Note: Performance for pump with 204 motor._ Viton® is a registered trademark of DuPont Dow Elastomers.

 Open the catalog to page 1
FMC-75-HYD-2

Ace Pump Corporation • 1650 Channel Avenue • Memphis, TN 38113 www.AcePumps.com • Phone: 901-948-8514 • Fax: 901-774-6147

 Open the catalog to page 2

All Ace Pump Corporation catalogs and technical brochures

  1. FMC-150-HYD-206
    FMC-150-HYD-206

    2  Pages

  2. Product Catalog
    Product Catalog

    28  Pages

  3. FMC 200
    FMC 200

    2  Pages

  4. FMC 150
    FMC 150

    2  Pages

  5. PTOC series
    PTOC series

    4  Pages

  6. FMC-HYD
    FMC-HYD

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.