Catalogs >
Addfield Environmental Systems >
Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC
1 / 5Pages

Catalog excerpts

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC - 1

‘The most thermally efficient, robust and reliable medical incinerators on the market Simply Built Better!’ 1300Kg Waste Incinerator Specifically designed for Medical waste also We facturey u it man capac e h hig n rat s Touch Screen t: +44 (0)1543 571280 | f: +44 (0)1543 571173 e: sales@addﬁeld.co.uk | www.addﬁeld.co.uk Addﬁeld Environmental Systems Limited Hollies Park | Cannock | Staffordshire | WS11 1DB | UK All information should be used as a guide only, specifications are subject to change without notice. © Addfield Environmental Systems Ltd The second largest low capacity medical incinerator in our range, extremely robust with a pre-cast block abrasion /impact resistant seal to prevent damage through mechanical loading. The GM1300 is ideal for medical, clinical and pathological category 0 to 2 type waste. With an internal main chamber volume of 2.3m³, the GM1300 ensures even the largest material can be loaded fast and efficiently. Complete with an excess air systems that maintain a constant burn rate up to 50kg per hour cleanly and efficiently ev

Open the catalog to page 1

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC - 2

1300Kg Waste Incinerator Specifically designed for Medical waste The medical GM range is designed as a two stage incinerator unit comprising of a primary loading chamber and a secondary after burner chamber. This afterburner system draws the hot gases from the primary chamber, this ensures a clean (and compliant) burn at temperatures of 850-1150°C. Carbon Dioxide (C02) Water (H20) Oxygen (02) Sulphur Dioxide (S02) Nitrogen (N2) Smoke 6% † 1300 Max Load Capacity (kg) < 50 Nominal Burn Rate UK*(kg/hr) Burn Rate [Export Only]* (kg/hr) 50-75 190 Thermal Capacity (kw/hr) 210/230v Power Supply...

Open the catalog to page 2

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC - 3

Primary Chamber • Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement. • High alumina content refractory bricks, hold heat for longer. • One manually operated, access lid. • Two waste ignition burner, temperature controlled on-off, complete with internal air fans. • A pre-cast block impact zone, that protects the refractory lining when loading. 1300Kg Waste Incinerator Specifically designed for Medical waste Key Features: We have CFD modelled all of our incinerators by utilising some of the most advanced...

Open the catalog to page 3

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC - 4

Addfield Programmable Logic Controller Key Features: Waste Loading and De-Ashing The medical GM series of incinerators are designed for top loading only through the main access door. Due to the type of wastes they incinerate, bio-security measures should be in place on the site of the incinerator due to the possibility of spillage and spread of disease. At the end of every incineration process ash should be discharged through the loading door onto the supplied catcher tray prior to being loaded for the next burn. Waste types to be used in the Addfield GM1300 Incinerator • 0-50% Moisture •...

Open the catalog to page 4

Addfield GM1300 Medical Waste Incinerator Datasheet GA PLC - 5

Chimney Sections Weather Guard PLAN VIEW FLOOR PLAN 150mm concrete base ISOMETRIC VIEW Control Panel Addfield Environmental Systems Ltd Unit 17 Hollies Park Cannock Staffordshire WS11 1DP www.addfield.co.uk title GENERAL ARRANGEMENT OF GM1300 INCINERATOR All information should be used as a guide only, specifications are subject to change without notice. © Addfield Environmental Systems Ltd

Open the catalog to page 5