Addfield GM250 Medical Waste Incinerator Datasheet GA PLC
4Pages

{{requestButtons}}

Catalog excerpts

Addfield GM250 Medical Waste Incinerator Datasheet GA PLC - 1

The Addfield General Medical (GM) range of Incinerators. Compact top loading incinerator for secure disposal of sharps, general medical, clinical, and pathological waste. QUALITY ASSURED FIRM QUALITY ASSURED FIRM The GM250 is a compact medical waste incinerator. Designed for complete destruction of general medical waste. Manufactured to deliver optimum results through retaining maximum heat within the main chamber. Constructed with a multi layered 180mm brick refractory placing our machines at the forefront of quality. The GM250 has a 0.45m³ chamber volume, making it ideal for smaller hospitals and clinical practices. Utilising pulse firing burners, our range of incinerators are up to more e cient than other machines, saving fuel and money. Machine Specification External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) Thermal Capacity (kW) Power Supply 50/60 hz Door Aperture Control Panel Primary Chamber • Pre-cast block impact zone protecting refractory lining during loading. • Heavily insulated internal brick refractory, constructed along an interlocking systems to ensure maximum strength and resilience. • Premium grade high alumina content refractory brick work delivering optimal thermal retention. • Top loading counter balanced insulated access lid. • Temperature controlled waste ignition burner automatic on o , complete with internal air fans. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on o control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 1100°C minimum. Waste Type Clinical Waste Treated Waste Fuel Types Anatomical Waste Insulation Board Cytotoxic & Cytostatic Waste Insulation Fire Brick Fire Brick (Alumina) *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. ygiene Waste Medicinal Waste Domestic (municipal) Waste Addfield Environmental Systems Limited Unit 9 | Zone 4 | Burntwood Business Park Staffordshire | WS7 3XD | United Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to

Open the catalog to page 1
Addfield GM250 Medical Waste Incinerator Datasheet GA PLC - 2

The Addfield General Medical (GM) range of Incinerators. Waste Loading and De-Ashing The GM range of incinerators are designed for top loading directly into the primary chamber. Loading can be manual or mechanically through digger or hydraulic bin tippler. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume, ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates. Optional deashing doors are available. The Addfield Difference • Pre-Fabricated 8mm & 10mm robust mild steel...

Open the catalog to page 2
Addfield GM250 Medical Waste Incinerator Datasheet GA PLC - 3

Last saved date Unit 9, Zone 4 Burntwood Business Park, WS7 3XD THIS DRAWING AND ALL INFORMATION CONTAINED HEREON IS THE PROPERTY OF ADDFIELD ENVIRONMENTAL SYSTEMS LIMITED, WITHOUT WHOSE PERMISSION IT MAY NOT BE COPIED SHOWN OR OTHERWISE USED AND IT IS TO BE RETURNED PROMPTLY ON REQUEST. Maximum Surface Finish, Unless otherwise stated WHOLE NUMBERS 1 DECIMAL PLACE 2 DECIMAL PLACE ANGLES Tolerances, Unless otherwise stated Drawing Number:

Open the catalog to page 3
Addfield GM250 Medical Waste Incinerator Datasheet GA PLC - 4

Addfield Intelligent Controller Simple to operate adaptive control system for achieving optimal results from your mac Controller Features The Addfield PLC Controller has been developed to provide you with a simple yet effective operational process. Designed around a touch screen HMI interface, and independent burner control buttons and switches. The touch screen interface provides all of your essential operations at the press of a finger. Having pre-loaded programmes optimised for your individual requirements, waste type and operating regime. Giving you instant access to live temperature...

Open the catalog to page 4

All Addfield Environmental Systems catalogs and technical brochures

  1. RAPID1000

    4 Pages

  2. MINI AB

    3 Pages

  3. MINI

    3 Pages

  4. MINI PLUS

    3 Pages

  5. SB

    3 Pages

  6. TB

    3 Pages

  7. MINI AB AQUA

    4 Pages

  8. THUNDER 500

    3 Pages

  9. MP-500

    3 Pages

  10. GM350

    5 Pages

  11. GM250

    5 Pages

  12. TB-AB PET

    3 Pages

  13. TB PET

    3 Pages

  14. CREMULATOR

    2 Pages

  15. A50-IC (2)

    3 Pages

  16. AES100-2SEC

    5 Pages

  17. LABMASTER 25

    4 Pages

  18. RAPID1000

    6 Pages

  19. TBAB-MAX

    5 Pages

  20. C300

    5 Pages

  21. PetCremation

    6 Pages

  22. MP-100

    8 Pages