Addfield GM500 Medical Waste Incinerator Datasheet GA PLC
5Pages

{{requestButtons}}

Catalog excerpts

Addfield GM500 Medical Waste Incinerator Datasheet GA PLC - 1

‘The most thermally efficient, robust and reliable animal incinerators on the market Simply Built Better!’ 500Kg Waste Incinerator Specifically designed for Medical waste Our mid range low capacity medical incinerator, extremely robust with a pre-cast block abrasion/impact resistant seal to prevent damage through mechanical loading. The GM500 is ideal for medical, clinical and pathological category 0 to 2 type waste. With an internal chamber volume of 1m3, the GM500 ensures even the largest material can be loaded fast and efficiently. Complete with an excess air systems that maintain a constant burn rate up to 50kg per hour cleanly and efficiently every time. addfield Incinerate • Cremate t: +44 (0)1543 571280 | f: +44 (0)1543 571173 e: sales@addfield.co.uk | www.addfield.co.uk Addfield Environmental Systems Limited Hollies Park | Cannock | Staffordshire | WS11 1DB | UK

Open the catalog to page 1
Addfield GM500 Medical Waste Incinerator Datasheet GA PLC - 2

The medical GM range is designed as a two stage incinerator unit comprising of a primary loading chamber and a secondary after burner chamber. This afterburner system draws the hot gases from the primary chamber, this ensures a clean (and compliant) burn at temperatures of 850-1150°C. t Based on general municipal waste streams * Depending on the type waste stream being loaded and excludes heat up time. Fuel Input Diesel Composition % Carbon We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an...

Open the catalog to page 2
Addfield GM500 Medical Waste Incinerator Datasheet GA PLC - 3

Secondary Chamber • Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation. • One secondary chamber burnout burner, temperature controlled on-off, complete with internal air fans • Integrated combustion burner air fans with automatically controlled distribution to their designated area. • One temperature sensor mounting point at the top of the chamber ensuring the chamber reaches the necessary 1100°C minimum. 500Kg Waste Incinerator Specifically designed for Medical waste Key Features: We have CFD modelled all of our incinerators by utilising...

Open the catalog to page 3
Addfield GM500 Medical Waste Incinerator Datasheet GA PLC - 4

500Kg Waste Incinerator Specifically designed for Medical waste Addfield Programmable Logic Controller Key Features: Waste Loading and De-Ashing The medical GM series of incinerators are designed for top loading only through the main access door. Due to the type of wastes they incinerate, bio-security measures should be in place on the site of the incinerator due to the possibility of spillage and spread of disease. At the end of every incineration process ash should be discharged through the loading door onto the supplied catcher tray prior to being loaded for the next burn. Waste types to...

Open the catalog to page 4
Addfield GM500 Medical Waste Incinerator Datasheet GA PLC - 5

FLOOR PLAN 150mm concrete base Chimney Sections Control Panel PLAN VIEW GENERAL ARRANGEMENT OF GM500 INCINERATOR Unit 17 Hollies Park Cannock ISOMETRIC VIEW

Open the catalog to page 5

All Addfield Environmental Systems catalogs and technical brochures

  1. RAPID1000

    4 Pages

  2. MINI AB

    3 Pages

  3. MINI

    3 Pages

  4. MINI PLUS

    3 Pages

  5. SB

    3 Pages

  6. TB

    3 Pages

  7. MINI AB AQUA

    4 Pages

  8. THUNDER 500

    3 Pages

  9. MP-500

    3 Pages

  10. GM350

    5 Pages

  11. GM250

    5 Pages

  12. TB-AB PET

    3 Pages

  13. TB PET

    3 Pages

  14. CREMULATOR

    2 Pages

  15. A50-IC (2)

    3 Pages

  16. AES100-2SEC

    5 Pages

  17. LABMASTER 25

    4 Pages

  18. RAPID1000

    6 Pages

  19. TBAB-MAX

    5 Pages

  20. C300

    5 Pages

  21. PetCremation

    6 Pages

  22. MP-100

    8 Pages