thermally efficient, robust and reliable animal incinerators on the market Simply Built Better!’ 250Kg Waste Incinerator Specifically designed for Medical waste Our mid range low capacity medical incinerator, extremely robust with a pre-cast block abrasion/impact resistant seal to prevent damage through mechanical loading. The GM250 is ideal for medical, clinical and pathological category 0 to 2 type waste. With an internal chamber volume of 0.45m3, the GM250 ensures even the largest material can be loaded fast and efficiently. Complete with an excess air systems that maintain a constant burn rate up to 50kg per hour cleanly and efficiently every time. t: +44 (0)1543 571280 | f: +44 (0)1543 571173 e: [email protected] | www.addfield.co.uk Addfield Environmental Systems Limited Hollies Park | Cannock | Staffordshire | WS11 1DB | UK addfield Incinerate • Cremate All information should be used as a guide only, specifications are subject to change without notice. © Addfield Environmental Systems Ltd

The medical GM range is designed as a two stage incinerator unit comprising of a primary loading chamber and a secondary after burner chamber. This afterburner system draws the hot gases from the primary chamber, this ensures a clean (and compliant) burn at temperatures of 850-1150°C. t Based on general municipal waste streams * Depending on the type waste stream being loaded and excludes heat up time. Fuel Input Diesel Composition % Carbon We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement...

Primary Chamber • Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement. • High alumina content refractory bricks, hold heat for longer. • One manually operated, access lid. • One waste ignition burner, temperature controlled on-off, complete with internal air fans. • A pre-cast block impact zone, that protects the refractory lining when loading. t: +44 (0) 1543 571280 | f: +44 (0) 1543 571173 e: [email protected] | www.addfield.co.uk Addfield Environmental Systems Limited Hollies Park | Cannock | Staffordshire...

250Kg Waste Incinerator Specifically designed for Medical waste t: +44 (0) 1543 571280 | f: +44 (0) 1543 571173 e: [email protected] | www.addfield.co.uk Addfield Environmental Systems Limited Hollies Park | Cannock | Staffordshire | WS11 1DB | UK Waste Loading and De-Ashing The medical GM series of incinerators are designed for top loading only through the main access door. Due to the type of wastes they incinerate, bio-security measures should be in place on the site of the incinerator due to the possibility of spillage and spread of disease. At the end of every incineration process ash...

FLOOR PLAN 150mm concrete base Chimney Sections Control Panel PLAN VIEW GENERAL ARRANGEMENT OF GM250 INCINERATOR Unit 17 Hollies Park Cannock ISOMETRIC VIEW