Fendt 5185 E
7Pages

{{requestButtons}}

Catalog excerpts

Fendt 5185 E - 2

My family – my fields – my Fendt. You can always rely on your family. Just like on the next generation of the Fendt E-Series. These redesigned combines are equipped with the tried and tested components found in the bigger ranges and are therefore used to working hard. Robust, reliable and efficient, they guarantee high seasonal performance when it is needed the most. That makes it an assistant you won’t want to do without, especially on family-run farms.

Open the catalog to page 2
Fendt 5185 E - 3

Wide-angle mirror Large electrically adjustable, heated mirrors plus optional wide-angle mirror ensure perfect all-round visibility. View to cutter unit – direct view Everything in view: thanks to the best sightlines, the entire cutter unit can be seen from inside the cab. THE ERGONOMIC OPERATOR ENVIRONMENT My comfort zone for long days. Spacious and clearly laid out – my E-Series Your work days begin and end, relaxed and satisfied, in the comfortable cab on the Fendt E-Series. Large, curved glazed areas and narrow pillars give you a full view to the outside. Inside, the generous layout of...

Open the catalog to page 3
Fendt 5185 E - 4

Front and rear concave setting can be adjusted independently Front perfect, the rear, too: the front and rear concave openings can be adjusted independently. You can adapt the threshing unit to any possible harvesting conditions from the comfort of the cab. Variant sectional concave TABLE AND THRESHING UNIT There are two front segments available for the quick-change sectional concave: 14 mm wire spacing for grain harvesting and 24 mm for maize harvesting. High torque with less breakage. The reliable FreeFlow table With a working width from 4.20 m to 6.00 m, the FreeFlow table can tackle all...

Open the catalog to page 4
Fendt 5185 E - 5

Engine Fendt 5185 E Max. power (ISO TR14396) Fuel tank capacity AdBlue tank capacity Clean chopping results, the cleanest sample. High-performance chopping The new Fendt E-series is standard-equipped with a 4-row straw chopper and a total of 52 knives. The double serrated knives with an infinitely adjustable shearbar (also serrated) have been fitted for high, uniform chopping performance. You can set the chopping length as desired and there is no more worrying about producing perfect chopping results. No one cleans better The Fendt 5185 E has one of the largest sieve areas in its power...

Open the catalog to page 5
Fendt 5185 E - 6

FENDT E-SERIES Technical Specifications. Standard and optional equipment Standard:  Optional:  Fendt Table Threshing system Straw and chaff management Table widths FreeFlow from – to Cutting frequency FreeFlow Chains in crop elevator Threshing cylinder width Threshing cylinder diameter Cylinder speed Concave angle of wrap Concave area Independent front/rear concave adjustment Concave bars Beater diameter Active total separation area Straw walkers Straw walkers steps Straw walker length Straw walker area Total separation area Sectional concave Maize equipment kit Rice equipment kit...

Open the catalog to page 6
Fendt 5185 E - 7

Leaders drive Fendt. WWW.fendt.com Your Agriculture Company AGCO GmbH - Fendt Marketing Fendt is a worldwide brand of AGCO. 87616 Marktoberdorf, Germany All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information available at the time of going to press. Changes may be made before the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information. Vehicles are not shown with country-specific equipment.

Open the catalog to page 7

All AGCO GmbH catalogs and technical brochures

  1. Fendt Katana

    25 Pages

  2. Fendt C-Series

    19 Pages

  3. Fendt IDEAL

    23 Pages

  4. 800 vario

    19 Pages

  5. 300 vario

    17 Pages

  6. 200 vario

    15 Pages

  7. 1100 mt

    9 Pages

  8. Fendt 5225 E

    11 Pages

Archived catalogs