1. Catalogs
  2. AGCO GmbH
  3. FENDT C-SERIES - Technical specifications

FENDT C-SERIES - Technical specifications
1 /1Page

FENDT C-SERIES - Technical specifications

FENDT C-SERIES - Technical specifications
1 /1Page

Catalog excerpts

FENDT C-SERIES - Technical specifications-1

Standard and optional equipment Standard: g Optional: c FENDT C-SERIES Table Table widths FreeFlow from - to Cutting frequency FreeFlow Table widths PowerFlow from - to** Cutting frequency PowerFlow TerraControl II™ table guidance Rape auger Electric rape knife Multi-coupler Residual grain separation Multi Crop Separator Plus (MCS Plus) Active total separation area Straw walkers Steps Straw walker length Straw walker area Total separation area Engine Stage number litres kW/hp litres litres Hydrostatic drive Gear steps Mechanical gear shift Four-wheel drive Atrak crawler track ParaLevel slope compensation ParaLevel Integrale slope compensation ParaLevel slope compensation, four-wheel drive ParaLevel slope compensation, front-wheel drive Cab Skyline cab Air-suspended driver seat Automatic climate control Heating Electrically adjustable heated exterior mirrors Additional wide-angle mirror Additional work light Radio Reversing camera Cooler compartment integrated into the passenger seat Headlamps Loss indicator Fendt Variotronic Fendt Varioterminal 10.4'' Fendt VarioGuide Fendt Connect Yield and moisture measurement Yield mapping Weights and dimensions Length without table Width without table, standard tyres Weight base machine, without table, without optional equipment Height Grain tank Grain tank capacity Turret unloading Unloading rate Unloading tube length Flap and slide for taking samples Cleaning Sectional cleaning system Preparation floor, in sections and detachable Preparation floor area Total sieve area Fan speed Blower speed, reduced Electrical blower setting HC sieves Electric sieve adjustment Returns indicator Returns camera Threshing system MCS Plus threshing unit Threshing cylinder width Threshing cylinder diameter Threshing cylinder speed Concave wrap Concave area, total Concave bars Sectional concave Maize equipment kit Crop elevator Power Feed Roller Intake chains Hydraulic reverse Straw chopper Straw chopper 72 serrated knives 88 serrated knives Chaff spreader Electrically adjustable deflector plates Quick-switch (chopping/swathing) AGCO Power Engine Emission stage Cylinders Displacement Max. performance with PowerBoost (ECE R 120) Fuel tank capacity AdBlue tank capacity Corn header CornFlow™ Rows (foldable) Rows (rigid) Row spacing Stalk chopper Intake auger Drive axle tyres (standard) Steering axle tyres (standard) Transport widths Atrak crawler track (24'' - 610 mm) 800/65R32 800/65R32 710/75R32 650/75R32 * = depends on country - additional legal constraints may apply

 Open the catalog to page 1

All AGCO GmbH catalogs and technical brochures

  1. Fendt Katana

    25  Pages

  2. Fendt IDEAL

    23  Pages

  3. 300 vario

    17  Pages

  4. Fendt C-Series

    19  Pages

  5. Fendt 200 Vario

    11  Pages

  6. 800 vario

    19  Pages

  7. 200 vario

    15  Pages

  8. 200 v/f/p vario

    17  Pages

  9. 1100 mt

    9  Pages

  10. Fendt Municipal

    19  Pages

  11. Fendt 5225 E

    11  Pages

  12. Fendt 5185 E

    7  Pages

  13. Fendt 500 Vario

    25  Pages

Archived catalogs

  1. Fendt 900 Vario

    19  Pages

  2. Fendt 700 vario

    19  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.