A new range of Fendt Slicer mower combinations
1 / 17Pages

Press release A new range of Fendt Slicer mower combinations Changeable weather often leaves narrow time windows for mowing, so areas must be harvested ever more quickly and efficiently. Fendt has developed a new range of butterfly mowers specifically for contractors and large farms. The new range of 12 models feature the powerful Streamline cutter bar as standard. In addition, there are equipment options such as the newly developed groupers and ISOBUS functions, such as a speed-dependent control of the contact pressure, automations for the conditioner and the lateral shift or Section Control. The new Fendt Slicer model range of mower combinations is available in two working widths: Fendt Slicer 960 and Fendt Slicer 1010, each with conditioner. The 960 stands for a maximum working width of 9.60 meters and the 1010 for a maximum working width of 10.10 meters. Models with the suffix KC are equipped with a tine conditioner, while the RC designation refers to the roller conditioner. The Pro suffix indicates ISOBUS functions, while the B designation stands for groupers. The series includes the following butterfly mowers: Fendt Slicer 960 KC Fendt With Slicer conditioner & 960 KC ISOBUS Pro With Fendt conditioner, Slicer ISOBUS & 960 KCB groupers Pro With conditioner Fendt Slicer 960 RC Fendt Slicer 960 RC Pro Fendt Slicer 960 RCB Pro Fendt Slicer 1010 KC Fendt Slicer 1010 KC Pro Fendt Slicer 1010 KCB Pro Fendt® is a worldwide brand of AGCO. © $year AGCO GmbH. All rights reserved. Fendt Slicer 1010 RC Fendt Slicer 1010 RC Pro Fendt Slicer 1010 RCB Pro

Press release Thanks to a pendulum travel of -19° to +26°, the mower works precisely even in undulating terrain. Using two pins, the mower units are positioned 15 cm further in or out, without shortening the PTO shaft, in order to overlap optimally with the front mower unit. This allows the mower combination to be linked with various front mowers. In combination with the Fendt Slicer 960, a front mower fits with a working width of 3.10 meters. The Fendt Slicer 1010 is driven together with a front mower of 3.60 meters working width, such as the Fendt Slicer 360 FQ front mower. A total of 12...

Press release Fendt® is a worldwide brand of AGCO. © $year AGCO GmbH. All rights reserved.

Press release Spur gear cutter bar with large discs – flexible and low-wear The Streamline spur gear cutter bar is already familiar from the Fendt Slicer 860 and 960 mower combinations, the Fendt Slicer TLX rear mowers and the Fendt Slicer F and FQ front mower models. When developing the spur gear cutter bar, the focus was on durability, high efficiency and a flat design. The robustly designed cutter bar combines high throughput with a steady flow of forage even in challenging conditions. The drive concept, which is consistently designed for efficient use of power, allows a reduced PTO speed of...

Press release Floating cut due to TurboLift Developed for a wide range of operating conditions and tested internationally, all models of the new Fendt Slicer butterfly mowers feature the TurboLift hydropneumatic cutter bar relief system and specially shaped extension arms for greater freedom of movement. The floating cut reduces the contact pressure and guides the mower precisely along the contours of the ground. With TurboLift, drivers can continuously adjust the mower directly from the cab to the conditions while driving. This protects the sward andfurtherreduces the amount of contamination...

Press release Fendt® is a worldwide brand of AGCO. © $year AGCO GmbH. All rights reserved.

Press release Tine and roller conditioner for Fendt mowers The Fendt Slicer 960/1010 KC and KCB with tine conditioner creates an air-permeable forage structure, requires a low speed and thus operates particularly fuel-efficiently. The Fendt Slicer 960/1010 RC and RCB models are equipped with a roller conditioner. Farmers and contractors can now choose between a rubber or steel roller conditioner to better address regionally varying crops. The roller conditioners are specially designed for gentle conditioning in leafy crops such as clover or alfalfa. The Fendt Slicer 960 and 1010 RC and RCB...

Press release Newly designed groupers for flexible swath widths Mowers with groupers are usually used in combination with powerful forage harvesters or forage wagons. If the rouper moves the material more cleanly, the throughput of the forage harvester or forage wagon increases. The grouper belt of the Fendt Slicer series has been further developed precisely for this process and enables more flexible swath widths with the familiar BeMove function. Drivers use BeMove to continuously adjust the swath width and the working speed of the conveyor belts. With the aid of this function, swath widths...

Press release Fendt® is a worldwide brand of AGCO. © $year AGCO GmbH. All rights reserved.

Press release Automatic lateral shift for Fendt Slicer mowers If the front and rear mowers are not optimally matched, strips can easily be left, especially when mowing on slopes or in curves. These either remain on the area or have to be mowed again in another pass. In order to prevent this strip formation, Fendt has developed an automatic lateral shift for the Fendt Slicer front mower, controlled by the rear mower. Automatic lateral shift is available for the Fendt Slicer FQ in conjunction with a new ISOBUSenabled Fendt Slicer model. The control is based on the data from the rear mower and...

Press release Quick and easy maintenance of the mowers The design and construction of the mowers are built for durability as well as easy and quick maintenance. The intelligent design of the overall structure significantly reduces dirt accumulation. If necessary, the mower can be blown out quickly and easily. The new hose cabinet is located under the bonnet and all hoses are stowed away protected from the weather. Indicators for the working height and the transport lock are visible directly from the tractor cab. In addition, there is a chain to indicate the transport height. Features such as...