BELT CONVEYORS
20Pages

10" U-TROUGH TUBE 15" BELT UP TO 12,500 BPH 49' LENGTH MOVER KIT FEATURES • Adds an extra 15” of discharge height when compared to previous models • All wheel drive • 160° turning radius for tight yards CAPACITY TUBE GAUGE BELTTYPE BELT LENGTH LIFT FRAME TYPE AXLE HUB TIRES PARKING JACK HOPPER DIMENSIONS HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) CONVEYOR WEIGHT FEATURES • All grain commodity system suitable for all seed types, including oil seeds • Easy to use spray and run wash system removes debris and residue on the back side of the belt from tough to wash...

COMMAND CENTER MOTOR AND BELT DRIVES BELT SEAL AND TEXTURE

All grain commodity system suitable for all seed types, including oil seeds Easy to use spray and run wash system removes debris and residue on the back side of the belt from tough to wash commodities Two belt scrapers and one belt brush come standard helping to keep your belt clean Two-year limited warranty Ergonomic command center controls electric throttle, lights, start/stop, hydraulics, and electric clutch, with joystick steer for mover kit hydraulics Hopper with urethane seals, a stiffened hopper cloth, urethane flashing, and a 32" parallel width for the full working length S-drive...

UNDER MOUNT (UM) MOTOR OPTION COMMAND CENTER MOTOR AND BELT DRIVES BELT SEAL AND TEXTURE TOP MOUNT (TM) MOTOR OPTION

FX 4 10" TUBE 15" BELT UP TO 7,000 BPH 39' , 44' , AND 49' LENGTHS • New pinch roller design allows for easier assembly, better belt traction and improved efficiency • Available in electric, gas over hydraulic or hydraulic drives so you can move grain even when you don't have electricity • Parallel hopper cloth stays 33 3/8" wide for the full working length • Grain flows straight down from the spout with the no-nonsense hood FLTD - FIELD LOADER TOP DRIVE FEATURES • Drive roller and pinch roller track together and are easier to access with a removable top plate • Hopper lifting handle helps...

TUBE GAUGE BELT TYPE BELT LENGTH Hand or hydraulic winch FRAME TYPE PARKING JACK 1000 lbs rating, top twist, 2 1/2" receiver, 15" travel HOPPER DIMENSIONS HP REQUIRED (WITH DRY WHEAT) 40” length x 31 1/4” width x 20 1/2” height CONVEYOR WIDTH (HUB FACE TO FACE) HITCH WEIGHT (WITH MOTOR INSTALLED) CONVEYOR WEIGHT HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH HALFWAY REACH RAISED HEIGHT AT LIFT ARMS HALFWAY HEIGHT AT WHEELS RAISED REACH AT LIFT ARMS HALFWAY REACH AT WHEELS RAISED HEIGHT AT 23° ANGLE TO BOTTOM OF SPOUT Heights measured from b

PRODUCT LINE TUBE GAUGE FEATURES • 2-Ply chevron belt with poly slider backing • 205-75-14 tires • Collapsible intake hopper • Manual lift winch • Standard with weather guards • Poly return rollers • Powder coat paint BELT TYPE BELT LENGTH PARKING JACK HOPPER DIMENSIONS Hand winch A-frame 2" sq. x .188" 5-bolt on 4.5", 3.31" pilot 205/75-14 N/A 1000 lbs load rating, top twist, 2 1/2" receiver, 15" travel 33 3/4" length x 19 3/s" width on narrow end, 34 V2" width on wide end x 30 V2" height HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) CONVEYOR WEIGHT HEIGHT LOWERED Heights...

A-FRAMES AND LONG CONVEYORS 1500 SERIES 10" TUBE // 15" BELT UP TO 6,000 BPH 35' - 100’ LENGTHS 14" TUBE // 20" BELT UP TO 9,000 BPH 45' – 120' LENGTHS 14" TUBE // 23.5" BELT UP TO 14,000 BPH 65' – 120' LENGTHS FEATURES • Electric, hydraulic, PTO or gas drive options • Gentle handling • Low maintenance and long-lasting belt • High capacity • Low horsepower required • A-frame undercarriage on 35’-55’ lengths • Hydraulic scissor lift on 65’-120’ lengths • Cable trussing on 55’-100’ lengths • Steel tube trussing on 105’-120’ lengths • Extendable axles on 85’-120’ lengths • Collapsible c

PRODUCT LINE TUBE GAUGE BELT TYPE BELT LENGTH TUBE TRUSSING 3/8" steel aircraft cable One 4" x 30 hydraulic cylinder Hand winch FRAME TYPE Hydraulic scissor lift PARKING JACK 7000 lbs load rating, top twist, 2 1/2" receiver, 25" travel HOPPER DIMENSIONS 37 7/8" length x 27 5/8" width at narrow end, 47 3/4" width at wide end x 29 15/16" height HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) AXLE EXTENSION LENGTH CONVEYOR WEIGHT SPECIFICATIONS HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH HALFWAY REACH RAISED HEIGHT AT LIFT ARMS HALFWAY HEIGHT AT WHEELS RAISED...

PRODUCT LINE TUBE GAUGE BELT TYPE 20" wide chevron ultimate BELT LENGTH TUBE TRUSSING 3/8" aircraft steel cable Hand winch FRAME TYPE 3.5" x .120W round tubing Two 4" x 36" hydraulic cylinders Three 4 1/2" x 40" hydraulic clyinders Hydraulic scissor lift ST235 / 80R16, load range "E", max speed 120 km/h, max psi 80 Side drive 35E 1 1/2”x 75”, 540 PTO Front drive 35E CV 540 PTO PARKING JACK 15000 lbs load rating, side twist, 2 1/2" receiver, 24" travel HOPPER DIMENSIONS 37 7/8" length x 37" width at narrow end, 48 15/16" width at wide end x 23 1/2" height HP REQUIRED (WITH DRY WHEAT)...

1500 SWINGAWAY PRODUCT LINE TUBE GAUGE BELT TYPE BELT LENGTH TUBE TRUSSING 3/8" steel aricraft cable FRAME TYPE Hydraulic scissor lift DRIVE OPTIONS PARKING JACK 7000 lbs load rating, top twist, 2 1/2" receiver, 25 " travel HOPPER DIMENSIONS N/A, enclosed with swingaway HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) AXLE EXTENSION LENGTH CONVEYOR WEIGHT SWINGAWAY WEIGHT SPECIFICATIONS HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH HALFWAY REACH RAISED HEIGHT AT LIFT ARMS HALFWAY HEIGHT AT WHEELS RAISED REACH AT LIFT ARMS HALFWAY REACH AT WHEELS RAISED...