*myagriexpo

Catalogs
AGI
AGI Batco Belt Conveyors and Accessories

AGI Batco Belt Conveyors and Accessories

Product catalog summary

Overview: The document provides comprehensive specifications and features of various belt conveyor models, including product lines such as UCX3, BCX3, FX4, TCX, and the 1500 and 2000 series. It highlights their capacities, dimensions, and unique features.

Specifications: Each product line is detailed with specific measurements for height, reach, and other dimensions at different positions. The document also includes information on tube gauge, belt type, belt length, lift mechanism, frame type, axle, hub, tires, parking jack, hopper dimensions, horsepower required, conveyor width, and weight for each model.

Features: Common features across models include suitability for all grain types, easy-to-use cleaning systems, belt scrapers and brushes, ergonomic command centers, sealed spouts, and various motor and drive options. Specific models offer additional features like all-wheel drive, increased discharge height, and different motor mounting options.

Performance and Capacity: The document outlines the capacity of each conveyor model, ranging from 3,800 bushels per hour (bph) to 14,000 bph, depending on the series and configuration. It also mentions the power requirements for operating the conveyors with dry wheat.

Recommendations and Best Practices: The document suggests using the ergonomic command center for efficient control and highlights the importance of the sealed edge belt to limit leakage. It also emphasizes the benefits of the straight down spout design for maintaining a lower working angle and increasing capacity.

Conclusion: The document serves as a comprehensive guide for selecting the appropriate belt conveyor model based on specific needs and operational requirements. It provides essential technical details and highlights the advantages of each model's design and features.

Product Lines and Capacities:

2000 Series: Capacity up to 9000 bph, with belt lengths ranging from 97' 10" to 247' 10".
2400 Series: Capacity up to 14000 bph, with belt lengths ranging from 140' 6" to 250' 6".
1500 Series: Capacity up to 6000 bph, with belt lengths ranging from 135' 3" to 205'.
PITSTOP FX: Capacity up to 18000 bph, with belt lengths of 48' 3" and 52' 1".
Railcar Unloader: Capacity up to 14000 bph, with a belt length of 100' 4".

Specifications:

Tubes and Belts: Tube gauges are typically 14" OD x 12 ga, with belt types varying from 15" to 23.5" wide chevron.
Lift Mechanisms: Include hydraulic cylinders and scissor lifts, with specific configurations per product line.
Axles and Hubs: Axles are generally 3" to 3 1/2" square, with 6-bolt hubs.
Tires: Various specifications, including ST205/75R15 and ST235/80R16, with load ranges and speed ratings.
Power Requirements: Vary by product line, with options for electric and PTO drives, requiring different horsepower based on the material handled.

Dimensions and Weights:

Conveyor Widths: Range from 86.375" to 150" hub face to face.
Conveyor Weights: Range from 3100 lbs to 9770 lbs, depending on the model and configuration.
Hopper Dimensions: Vary by model, with specific lengths, widths, and heights provided.

Features:

Streamlined intake and discharge designs for efficient grain flow.
Hydraulic, electric, or gas drive options available.
Optional self-propelled kits for certain models.

Specifications:
The document provides specifications for the AGI Batco 2442 Railcar Unloader, which includes a conveyor width of 92.25 inches and a weight of 5000 lbs. The unloader requires a Vanguard 37 HP EFI engine when handling dry wheat. The conveyor features a self-propelled hydraulic lift, spring-loaded walking axles, and four 6-inch wide high-performance wheels controlled by a hydraulic joystick steering system. It can be custom ordered with an electric drive or in stainless steel.

Railcar Unloader Features:
The unloader can handle up to 14,000 BPH and has a 4-inch hopper clearance. It is equipped with a gas engine drive mounted on the top side of the conveyor tube. Heights and reaches are specified for various positions (lowered, halfway, raised) with measurements provided in both feet and meters.

Bag Handling System:
The custom-built bag handling system is designed to reduce manpower for transporting bags up to 100 lbs or 50 kg. It is suitable for ground level or dock height operations and features durable solid decking, an electric over hydraulic drive, and requires a single operator to stack bags at up to 20 bags per minute. The system can extend to fill containers of different lengths.

Custom Underbin Conveyors:
These conveyors are available with 10-inch tubes and 13 or 15-inch belts, with lengths ranging from 18 to 138 feet. Options include electric drives, square or round poly hood spouts, sealed hopper lids, collapsible hopper intakes, and stainless steel components for enhanced durability.

Safety and Usage:
AGI emphasizes the importance of safety, advising users to read and understand the operator’s manual and safety decals before use. Proper maintenance and adherence to safety guidelines are crucial, and users are encouraged to contact AGI for replacements of any damaged or missing safety components.

Catalog excerpts

BELT CONVEYORS AND ACCESSORIES

Open the catalog to page 1

10" U-TROUGH TUBE 15" BELT UP TO 12,500 BPH 49' LENGTH • All grain commodity system suitable for all seed types, including oil seeds • Adds an extra 15” of discharge height when compared to previous models • All wheel drive • Easy to use spray and run wash system removes debris and residue on the back side of the belt from tough to wash commodities • 160° turning radius for tight yards • Two belt scrapers and one belt brush come standard helping to keep your belt clean • Two-year limited warranty PRODUCT LINE • Ergonomic command center controls electric throttle, lights, start/stop, hydraulics,...

Open the catalog to page 2

AGI Batco Belt Conveyors and Accessories-3

COMMAND CENTER MOTOR AND BELT DRIVES BELT SEAL AND TEXTURE

Open the catalog to page 3

AGI Batco Belt Conveyors and Accessories-4

10" TUBE 15" BELT UP TO 10,000 BPH 49' LENGTH • All grain commodity system suitable for all seed types, including oil seeds • Adds an extra 15” of discharge height when compared to previous models • All wheel drive • Easy to use spray and run wash system removes debris and residue on the back side of the belt from tough to wash commodities • 160° turning radius for tight yards • Two belt scrapers and one belt brush come standard helping to keep your belt clean • Two-year limited warranty PRODUCT LINE • Ergonomic command center controls electric throttle, lights, start/stop, hydraulics, and electric...

Open the catalog to page 4

AGI Batco Belt Conveyors and Accessories-5

UNDER MOUNT (UM) MOTOR OPTION COMMAND CENTER MOTOR AND BELT DRIVES BELT SEAL AND TEXTURE TOP MOUNT (TM) MOTOR OPTION

Open the catalog to page 5

AGI Batco Belt Conveyors and Accessories-6

FX 4 10" TUBE 15" BELT UP TO 7,000 BPH 39' , 44' , AND 49' LENGTHS • New pinch roller design allows for easier assembly, better belt traction and improved efficiency • Available in electric, gas over hydraulic or hydraulic drives so you can move grain even when you don't have electricity • Parallel hopper cloth stays 33 3/8" wide for the full working length • Grain flows straight down from the spout with the no-nonsense hood FLTD - FIELD LOADER TOP DRIVE FEATURES • Drive roller and pinch roller track together and are easier to access with a removable top plate • Hopper lifting handle helps guide...

Open the catalog to page 6

AGI Batco Belt Conveyors and Accessories-7

TUBE GAUGE BELT TYPE BELT LENGTH Hand or hydraulic winch FRAME TYPE PARKING JACK 1000 lbs rating, top twist, 2 1/2" receiver, 15" travel HOPPER DIMENSIONS HP REQUIRED (WITH DRY WHEAT) 40” length x 31 1/4” width x 20 1/2” height CONVEYOR WIDTH (HUB FACE TO FACE) HITCH WEIGHT (WITH MOTOR INSTALLED) CONVEYOR WEIGHT HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH HALFWAY REACH RAISED HEIGHT AT LIFT ARMS HALFWAY HEIGHT AT WHEELS RAISED REACH AT LIFT ARMS HALFWAY REACH AT WHEELS RAISED HEIGHT AT 23° ANGLE TO BOTTOM OF SPOUT Heights measured from b

Open the catalog to page 7

AGI Batco Belt Conveyors and Accessories-8

TUBE GAUGE 8" TUBE 12" BELT UP TO 3,800 BPH 22', 27' AND 32’ LENGTHS BELT TYPE BELT LENGTH Hand winch FRAME TYPE • 2-Ply chevron belt with poly slider backing • Collapsible intake hopper • Manual lift winch • Standard with weather guards PARKING JACK • Poly return rollers • Powder coat paint 1000 lbs load rating, top twist, 2 1/2" receiver, 15" travel 33 3/4" length x 19 3/8" width on narrow end, 34 1/2" width on wide end x 30 1/2" height HOPPER DIMENSIONS HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) CONVEYOR WEIGHT HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH...

Open the catalog to page 8

AGI Batco Belt Conveyors and Accessories-9

A-FRAMES AND LONG CONVEYORS 1500 SERIES 10" TUBE // 15" BELT UP TO 6,000 BPH 35' - 100’ LENGTHS 14" TUBE // 20" BELT UP TO 9,000 BPH 45' – 120' LENGTHS 14" TUBE // 23.5" BELT UP TO 14,000 BPH 65' – 120' LENGTHS FEATURES • Electric, hydraulic, PTO or gas drive options • Gentle handling • Low maintenance and long-lasting belt • High capacity • Low horsepower required • A-frame undercarriage on 35’-55’ lengths • Hydraulic scissor lift on 65’-120’ lengths • Cable trussing on 55’-100’ lengths • Steel tube trussing on 105’-120’ lengths • Extendable axles on 85’-120’ lengths • Collapsible

Open the catalog to page 9

AGI Batco Belt Conveyors and Accessories-10

PRODUCT LINE TUBE GAUGE BELT TYPE BELT LENGTH TUBE TRUSSING 3/8" steel aircraft cable One 4" x 30 hydraulic cylinder Hand winch FRAME TYPE Hydraulic scissor lift PARKING JACK 7000 lbs load rating, top twist, 2 1/2" receiver, 25" travel HOPPER DIMENSIONS 37 7/8" length x 27 5/8" width at narrow end, 47 3/4" width at wide end x 29 15/16" height HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH (HUB FACE TO FACE) AXLE EXTENSION LENGTH CONVEYOR WEIGHT SPECIFICATIONS HEIGHT LOWERED HEIGHT HALFWAY HEIGHT RAISED REACH LOWERED REACH HALFWAY REACH RAISED HEIGHT AT LIFT ARMS HALFWAY HEIGHT AT WHEELS RAISED REACH...

Open the catalog to page 10

AGI Batco Belt Conveyors and Accessories-11

PRODUCT LINE TUBE GAUGE BELT TYPE 20" wide chevron ultimate BELT LENGTH TUBE TRUSSING 3/8" aircraft steel cable Hand winch FRAME TYPE 3.5" x .120W round tubing Two 4" x 36" hydraulic cylinders Three 4 1/2" x 40" hydraulic clyinders Hydraulic scissor lift ST235 / 80R16, load range "E", max speed 120 km/h, max psi 80 Side drive 35E 1 1/2”x 75”, 540 PTO Front drive 35E CV 540 PTO PARKING JACK 15000 lbs load rating, side twist, 2 1/2" receiver, 24" travel HOPPER DIMENSIONS 37 7/8" length x 37" width at narrow end, 48 15/16" width at wide end x 23 1/2" height HP REQUIRED (WITH DRY WHEAT) CONVEYOR...

Open the catalog to page 11

AGI Batco Belt Conveyors and Accessories-12

2400 SERIES PRODUCT LINE TUBE GAUGE BELT TYPE 23.5" wide chevron ultimate BELT LENGTH TUBE TRUSSING LIFT 1/2" aircraft steel cable Two 4" x 30" hydraulic clyinders FRAME TYPE Three 4 1/2" x 40" hydraulic cylinders Hydraulic scissor lift Side PTO option 35E 1 1/2" x 75" PTO 1 3/8" 6 spline output; Front PTO option 35E CAT 4 50 DEG. E CV drive shaft 1 3/8" 6 spline output PARKING JACK 15000 lbs load rating, side twist, 2 1/2" receiver, 24" travel HOPPER DIMENSIONS 51 3/4" length x 37 3/4" width at narrow end, 50 1/4" width at wide end x 38 7/8" height HP REQUIRED (WITH DRY WHEAT) CONVEYOR WIDTH...

Open the catalog to page 12

AGI Batco Belt Conveyors and Accessories

AGI Batco Belt Conveyors and Accessories

Catalog excerpts

All AGI catalogs and technical brochures

Archived catalogs