Hutchinson Unload Systems
1 / 12Pages

SWEEPS / UNLOADS / POWER HEAD DRIVES

EXTENDED WEAR BIN UNLOADING PACKAGE AGI Hutchinson offers an upgrade package for standard and commercial bin unload systems that enhances flighting life in extreme conditions. The package includes: • Two revolutions of abrasion resistant (AR) flight at the center well on the unload flight • One revolution of AR flight at the discharge end of the unload flight • 1/4" flight on under-bin augers • 3/8" flight on horizontal power heads • 1/4" and AR sectional flight on sweeps • 1/4" and AR sectional flight on verticals • 1/4" and AR sectional flight on 25° unload systems and VAAC In 25° and...

KLEAN SWEEPS STANDARD KLEAN SWEEP FEATURES • Rubber disk end-wheel assembly drives sweep around the bin • Intermediate flight bearings on 30’ (9.1 m) diameter bins and larger • Drive includes driven sheave, belt and motor mount • 10" units have intermediate bronze bearings supporting the flight every 10' (3.1 m) or less COMMERCIAL KLEAN SWEEP FEATURES • 8.5:1 reduction on 810 and 1012 models • 810 and 1012 models have a 2.25:1 double gearbox drive to position the sweep closer to the bin floor • Sweep tractor drive is standard for 1214 models (optional on 1012 models) • Intermediate flight...

STANDARD & HEAVY-DUTY POWER SWEEP Splice plate for added strength Power Sweeps use one motor on the outside of the grain bin to power both the unloading flight and the sweep. They can remain inside the bin during the grain bin filling process and come in standard, and heavy-duty (HD) external or internal clutch. Reduced shaft to get sweep closer to the bin floor FEATURES • 8.5 to 1 wheel reduction • Sweep carrier for bins 48’+ diameter, not needed with HD internal clutch until 72’ Heavy-duty with internal clutch • Center power well and roller supported gate with gearboxes • Underbin auger...

COMMERCIAL POWER SWEEP The Commercial Power Sweep can accommodate a variety of unloading units, including: auger unloaders, u-trough, chain conveyors, and Grain Pump® loop systems. It offers the convenience of having the drive on the outside of the bin, but with the added feature of using a separate drive for the sweep. FEATURES • Two individual gearboxes allow for a compact center well design • End wheel has an 8.5:1 reduction drive • Intermediate wells provided with removable top flanges for easier installation • Sweep carrier provides extra support for flight and shield for sweeps in 48’...

SWEEP END-WHEEL • 8.5:1 reduction inside the wheel, reducing the distance from the sweep auger to the bin wall on sweeps • Polyurethane treads break up compacted grain and dig down to the bin floor to maintain a driving force into the grain pile • Each wheel is self-lubricated and sealed for longer life • Retrofit kits available for most 8" and 10" Klean and Power Sweeps 4-piece modular design allows for easy tread replacements without removing the gearbox Install the retrofit kit to your old 8" and 10" Klean Sweep in under 15 mi

NEXGEN 2000 & 3000 COMMERCIAL SWEEPS A key component to zero bin entry operation FEATURES • Built to remain in the bin • Sturdy construction to withstand years of heavy use • Serves bin diameters of 36' - 120' (11 m - 36.5 m) in 2000 model and 48’ to 150’ diameter (14.6 m - 45.7 m) in 3000 model CONTROLS • Zero-entry controls with panels located outside the bin • Auto start, stop and reverse capabilities Series 2 • Control box provides both total automation and manual operation Series 3 • Touchscreen control panel OPTIONAL TRU-KLEAN CHAIN & PADDLE SWEEP • Chain & paddles float across the...

HI-FLOW BIN SWEEP Bin floor FEATURES • ¼" flights mounted on 3” schedule 40 pipe • Heavy-duty backboard with a 5/8" rubber scraper • Zero-entry controls with panels located outside the bin • Below floor motor assembly which can be accessed from the reclaim tunnel at any time Center hopper • Adjustable front and rear wheels to level uneven floors 95" standard 106.5" for extended sump 88" standard 99.5" for extended sump 40" standard 51.5" for extended sump • Forward and reverse hydraulically driven track drive eliminates drive wheel spinning or climbing in grain piles A key component to zero...

STANDARD & COMMERCIAL AUGER UNLOADING FEATURES • Choice of unloading tube and flights to meet your capacity and size requirements • Various center bin well and intermediate bin well options available • Control pipe kits with either control lever or rack and pinion openers to select from • Bin flanges, quick connect flange clamps and an assortment of other possible components to complete your unload system Auger Unloading AUGER UNLOAD MODEL UNLOAD TUBE UNLOAD FLIGHT FLIGHT SPEED

EN MASSE CONVEYORS: MASS-TER MOVER UNLOAD AND GRAIN PUMP UNLOAD FEATURES • Long life of 81 X, 81 XHH, and WH 124 roller chain • Quiet operation and long life of UHMW plastic paddles • High capacity at lower operating speeds, resulting in longer life • Gate wells are roller gated or have rack and pinion controls *23" floor supports or trench is required Mass-ter Mover unload Mass-ter Mover Unload MASS-TER MOVER MODEL MASS-TER MOVER HOUSING (Z AM) CHAIN SPEED Grain Pump unload Grain Pump Unload MODEL CHAIN SPEED

AUGER UNLOADING POWER HEADS Horizontal power head MASS-TER MOVER POWER HEAD The Mass-ter Mover unloading power head can be used in conjunction with 30°, 45°, or 90° corners (15° available on model 50 units) that will provide the discharge height needed. A selection of reducer drives with various chain speeds and horsepower are available to match the capacity required. *23" floor supports or trench is required *Mass-ter Mover unload required 25° incline power head HORIZONTAL & 25° INCLINE Horizontal 6" (15.2 cm) | 8" (20.3 cm) | 10" (25.4 cm) | 12" (30.5 cm) 25° incline 6" to 8" (15.2 cm to...