Aeration Systems
38Pages

Aeration systems for lakes, ponds, tanks and containers. Feel free to consult us, we enjoy advising you about the right aeration system for your need. For success in fish breeding, oxygen-rich water is crucial. If the oxygen content is too low, the fish get sick and might even die of asphyxiation. For keeping carp there is a need of approximately 5 mg O2/l of water, trout need about 6 mg O2/l while it is important to ensure a content of 7-8 mg O2/l for the intensive farming with high-grade dry feed. Only then a good and profitable result is possible. Even in extensive ponds the oxygen level can drop below healthy values under these conditions: A) Summer: due to droughts the freshwater supply replenishing oxygen is not always ensured due to the high temperatures the oxygen levels drop, the water does not bond oxygen well Paddlewheel Aerators Oxygen Injectors Propeller Aerator (Fluboll) with vertical water ejection Propeller Injectors Compressor Aeration floating stationary B) Winter: The milky ice layer or a layer of snow prevent sufficient light from reaching the water plants which then additionally reduce the oxygen levels. Through aeration the pond is kept ice free and there is no need to regularly break open the ice. AERATION SYSTEMS Aeration Systems

AERATION SYSTEMS Paddlewheel Aerotors A very effective aeration system with great additional advantages. On top of the oxygen enrichment and gas exchange a current is created in the water. This improves visually and measurably the water quality and considerably reduces algae growth. The top quality, highly effective alternative made in Germany. The AGK paddlewheel aerator developed by AGK and tested under the most demanding of conditions. The latest development deliberately voids the weak points inherent in other well-known products. The equipment was designed in order to keep the lifetime...

Paddlewheel Aerotors Construction kit: kit for self assembly, reducing price and saving on shipping costs. Order No. depending on motorization, see below Technical Specifications: Paddlewheel speed: 124 rpm Motor power consumption: approx. 1.0 KW (= 1.37 hp) for 3 phase AC, motor nominal output: 1.5 KW, also available as single phase AC, all tensions an frequencies available. Weight: 117 Kg Dimensions: L x W x H: 2.40 x 1.88 x 0.72 m Delivery: paddlewheel aerator either fully assembled or in kit form for self assembly, reducing price and saving on shipping costs. Cable, plug and motor...

AERATION SYSTEMS Paddlewheel Aerotors Paddlewheel Aerator The top quality, highly effective alternative made in Germany. The AGK paddlewheel aerator developed by AGK and tested under the most demanding of conditions. The latest development deliberately avoids the weak points inherent in other well-known products. The equipment was designed in order to keep the lifetime costs, i.e. the sum of purchase and operating costs (energy and maintenance spending) to a minimum. This is achieved with the AGK paddlewheel aerator’s long service life and the high degree of effectiveness. Paddlewheel...

Paddlewheel Aerotors Construction kit: kit for self assembly, reducing price and saving on shipping costs. Order No. depending on motorization, see below Technical Specifications: Paddlewheel speed: 124 rpm Motor power consumption: approx. 0.5 KW for 3 phase AC, also available as single phase AC, all tensions an frequencies available. Weight: 117 Kg Dimensions: L x W x H: 1.78 x 1.88 x 0.72 m Delivery: paddlewheel aerator either fully assembled or in kit form for self assembly, reducing price and saving on shipping costs. Cable, plug and motor safety switch (not included) are supplied with...

Paddlewheel Aerotors AERATION SYSTEMS Paddlewheel Aerator O2 – Injection System 0.37 KW Order No. 3 000 000 840 0.75 KW Order No. 3 000 000 839 The top quality, highly effective alternative made in Germany. The AGK paddlewheel oxygen aerator has been developed by AGK based on the two-wheeled paddlewheel aerator and has been tested under the most demanding of conditions. The latest development deliberately avoids the weak points inherent in other well-known products. For example there is no oxygen loss through the shaft bearings. The special shape of the oxygen cover prevents leakage of...

Top Quality at a Great Price The top quality, highly effective alternative with a worm drive made in Germany. The AGK paddlewheel aerator has been developed by AGK and has been tested under the most demanding of conditions. This product also avoids the weak points inherent in other well-known products. This new generation of paddlewheel aerators does not need any additional bearings of the paddlewheel shaft, it is solely suspended by the drive. Thus the number of wear-prone component is reduced while friction is reduced and the mechanical efficiency is improved. The equipment was designed...

Propeller Aerator (Flubol) AERATION SYSTEMS Propeller aerator with vertical water ejection A time-proven system of aeration. The propeller, powered by an electric motor, sucks up water to eject it high above the water surface. Not only a high degree of oxygen enrichment can be achieved, additionally vertical circulation of the water will be improved, as water from the bottom is pumped to the surface. With suction shafts adapted to the water depth, water can even be transported from greater depths to the surface. Available with or without inlet basket Aerator – 0.15 KW, 0.37 KW, 0.75 KW Also...

Propeller Aerator (Flubol) Order No. Single phase / 3 phase DS* motor Power *3P = 3 phase current 1P = single phase AC Accessories: Inlet basket Connector 1 with motor protection switch Connector 2 without motor protection switch AERATION SYSTEMS Propeller aerator with vertical water ejection

Aeration Systems for small and large ponds AERATION SYSTEMS Water Fountain Order No. 3 000 000 846 The mushroom-shaped water fountain is a highly effective aeration means for small ponds, tanks and garden-biotopes. The mushroom shape can easily be adjusted by simply varying the nozzle. The height and the diameter of the ejected water can be set by adjusting the depth of the distributor cone in the nozzle. Technical Data: Pump: Capacity: Max. mushroom Ø: Submersed depth: Turbo-Injector Order No. 3 000 000 845 The propeller injector propels water diagonally downwards while it suck air through...