Electrical control valve (Solenoid controlled) Description This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the valve acts normally closed, which opens when is energized or as "NO", normally open, which as "NC", closes when is energized. Applications Electrical remote control. Any application depending on the control device: pressure control, pump protection, flow control, etc. Solenoids Port** Body material Reinforced Nylon ** Standard BSP; NPT on request PLASTIC BODY: Protection Class IP 66 Function Orifice AC DC DC Llatch NC NO BRASS BODY: Protection Class IP 65 with connector Function Power Orifice Available models Plastic valves 1 %2", 2" and 3" Metal valves threaded 12", 2", 2 %2",3" and 4" Metal valves grooved ("Victaulic") 2", 3" and 4" Metal valves flanged DN80, DN100, Dimensions / Pressure loss Plastic valves Metal valves threaded Drawing NC Metal valves grooved "Victaulic” Metal valves flanged Electrical control valve NC