Product Overview

This catalogue presents a range of agricultural tying and trellis products, tools, and accessories designed for vineyard, horticulture, and landscaping applications. It includes specifications for tying tapes, rubber ties, vine tying tools, tension wrenches, clips, protective shelters, anti-weed mesh, sprayers, staples, and fencing materials.

1. Tying Materials and Tools

• 604 Flex Cinta Agrícola (Tying Tape): Weight 0.630 kg (1.388 lb), width 7 mm (0.275 in), length approx. 4 5/32 inches. Used for tying plants.
• Rubber Ties (Goma Ancla): Available in various lengths from 2.5" to 7 3/32" (80 mm to 180 mm), wire diameter 1.30 mm (0.051 in). Used for elastic fixation in vineyards.
• Vine Tying Tools (Atadoras): Multiple models (e.g., mod 140, 150, 155) with weights ranging from 0.210 kg to 0.638 kg. Compatible with different clip sizes (E30, E40, E45, E50, E55) for tying irrigation pipes or vines.
• Tension Wrenches (Llave Tensora): Ratchet style tools with working loads between 150 kg and 600 kg (330 lb to 1,320 lb). Available in sizes 60 mm and 80 mm.

2. Clips and Protective Accessories

• Tomato Clips: Sizes include 21 mm and 29.6 mm with wire diameters around 1.39 mm (0.054 in). Used for securing tomato plants.
• Protective Clips and Shelters: Plastic clips available in sizes 25 mm, 45 mm, and 55 mm. Shelters available in 35 cm and 50 cm lengths for plant protection.

3. Twisting and Cutting Accessories

• Twist Ties and Cutting Rings: Available in various diameters (1.3 mm to 8 mm) and lengths (up to 60 cm). Working loads range from 250 kg to 600 kg (660 lb to 1,320 lb).

4. Sprayers

• Models PS 16/10, PS 7/10, PS 2A/10: Tank capacities of 16 L, 7 L, and 2 L respectively. Operating pressures between 2 and 4 bar (30 to 60 psi). Used for spraying in agricultural settings.

5. Fencing and Staples

• U-Nails (Grampillones): Sizes 30 mm and 35 mm with 3 mm wire diameter. Used for fencing and cage construction.
• Corrugated Staples: 10 cm length, 5 mm diameter for securing mesh or fencing materials.

6. Materials and Finishes

• Products are available in various materials including galvanized steel, plastic (green coated), fibreglass, and aluminium.
• Point types for nails and staples include chisel, divergent, and blunt points.

7. Additional Information

• Weights and dimensions are provided in metric and imperial units for international use.
• The catalogue includes references to compatible staples, magazine capacities for tying tools, and working loads for tension devices.
• Contact and export information for COMERSIM S.A.U. based in Orkoien, Navarra, Spain is provided.

Critical Parameters and Recommendations

• Ensure compatibility of clips and tying tools by matching model numbers and sizes (e.g., E30, E40, E45).
• Use appropriate tension wrenches according to the required working load to avoid tool or material failure.
• Choose protective clips and shelters based on plant size and environmental conditions.
• Follow pressure and capacity guidelines for sprayers to ensure effective application.
• Material selection should consider corrosion resistance and mechanical strength depending on application.

Note: The catalogue information is approximate and subject to change without prior notice.