CATALOGUE Barrio de Euba, S/N, 48340 Amorebieta (Vizcaya), España | T. +34 946 300 055 | www.agrimac.es

PRODUCT RANGE ALL TERRAIN FORKLIFTS 2 t TO 2,5 t Page 12 ALL TERRAIN FORKLIFTS 1,2 t TO 1,7 t Page 10

Q Q © MACHINES THAT QUALITY LOCAL TECHNICAL LAST A LIFETIME GUARANTEE SERVICE Agrimac is the machinery division of the company Agria Hispania, founded in 1958 in the Biscayan town of Amorebieta. In the beginning, we were dedicated to the manufacture of motorized tillers and motor cultivators, which grew in range and power to the current 100 HP isodiametric tractors. Later, in 1990, we entered the construction market with the manufacture of dumpers and all-terrain forklifts. Sixty-six years later we continue assembling machines in the same factory where we started. We maintain the same passion...

DUMPER 3,5 t The DW35 hydrostatic dumper is a new model designed to provide high performance at low cost, resist the most adverse working conditions and prolong the useful life of the vehicle. The reinforced chassis structure, twin lock intra-wheel motor transmission system and configuration of the 18.5 kW mechanical engine without electronics or particle filter that does not require revisions. It is a machine designed from the inside out. Robust structure and agile driving. Minimum expenditure on consumption and maintenance. In the short term it is designed to lead the list of working hours...

Intra-wheel engine. Each of the four wheels has a hydraulic motor housed on its axle that performs the translation movement. Compact size. It barely exceeds one meter seventy in width. It is a very narrow machine in relation to the three tons of loading capacity. Zero maintenance. Without differential axles, maintenance is reduced to a minimum. A forklift designed not to fail. Maneuverability. The articulated chassis, 180º unloading and improved traction with the Twin Lock anti-skating system combine to allow agile and precise driving. Loads three tons of material and unloads quickly and completely...

Système hydrostatique. Dans les systèmes hydrostatiques, l’énergie Nos dumpers sont conçus avec les meilleurs mécanique du moteur composants du marché, pour prolonger la vie est convertie en énergie utile des machines, supporter les travaux les plus hydraulique qui, via un intenses et, en même temps, éviter des périodes circuit d’huile, actionne d’inactivité à cause de maintenance. Même les roues et les élélorsqu’il est inévitable d’arrêter la machine pour ments mécaniques de la révision, l’utilisateur dispose d’éléments tels que machine. Ces systèmes les vannes Minimex qui permettent de prévoir...

CHARACTERISTICS DIMENSIONS Dumpers with in-wheel motors have a hydraulic engine on the axle of each driving wheel that performs the vehicle movement. This 4x4 distributed motorisation system guarantees higher performance than centralised engines. In-wheel motors are more reliable and more affordable to maintain. They also provide safer, more controlled driving. MINIMUM MAINTENANCE The hydrostatic in-wheel motor transmission allows the 330 mm pump and hydraulic motors to self-lubricate with the transmission oil itself. This is monitored through an oil level display in the cabin, which 1 016 mm...

Unité Unité - % Turning radius - inner avec 2 640mm mm Rayoncharge de virage intérieur intérieur Rayon de virage extérieur Turning radius - outer mm Rayon de virage extérieur Direction Steering Direction Traction 80-15,3 Traction Traction Freins Working pump Pompe Débit de travail Débit Pression Pression Réservoirs Réservoirs Carburant Carburant Huile Huile Équipement Équipement Batterie Batterie Flow Pressure Fuel Oil EQUIPMENT 1 415 mm Battery 2 avant et 2 arrière 2 avant et 182 arrière 4.025 Hydraulique avec vanne de Hydraulique avec vanne de priorité 4x4 4x4 50 accidents. Hydrostatic to wheels...

Horomètre. comptabilise Horomètre. IlIl comptabilise comptabilise les Horomètre. les Il comI Horomètre. IlHoromètre. comptabiliseIllesles 4x44x4 4x4 4x4Horomètre. 4x4 heures detravail travail de machine dumachine dedu travail heures deheures heures deladela machine travail deetheures etheures et dude trad de travail lademachine etladu con-ducteur, facilitant ainsi lefacilitant con-ducteur, facilitant con-ducteur, ainsi le ainsicon-ducteur, le facil con-ducteur, facilitant ainsi le con-ducteur, respect delalaloi loilaetet de ladesloi respect de respect de la loi etrespect lades respect des de...

ALL-TERRAIN FORKLIFTS FROM 1.2 to 1.7 t The one- to two-ton forklift series is designed to work, last and save money. These three aspects without limits. They are equipped with top quality materials and components of the best brands. This is the best guarantee that the machine will maintain its ability to work to its fullest as the years goes by. They have a much longer than average life than other trucks on the market. This, combined with low fuel consumption and zero maintenance costs, makes them a very profitable investment in the short term. This series has a compact design both in height...

HYDROSTATIC ALL-TERRAIN FORKLIFTS TW12 / TW16 / TW17 TW16 In-wheel motor technology makes maintenance virtually unnecessary. It has a 92.5 Nm mechanical engine that complies with Emissions Stage V. This makes the use of particle filters and regeneration unnecessary. This is a compact forklift, ideal for driving inside buildings. TW17 It has the dimensions and consumption of the small range and, at the same time, the structure and performance of the medium range. This combination makes it Agrimac's most versatile forklift. It works with loads of up to 1,700 kilos on any terrain with ample solvency...