*myagriexpo

TURBOMULCH®

Product catalog summary

Introduction
The TURBOMULCH® is a machine developed by AGRISEM for managing surface residues in agriculture. It is part of the 'Top Soil Management' range, designed to work at depths of 2 to 5 cm. The machine is used post-harvest to accelerate residue decomposition and equalize straws, manage weeds, and crop regrowth, and improve seed contact with the ground after seeding. It also helps reduce the use of chemical products in agriculture.

Specifications

Folding Models: Available in working widths of approximately 6.20 m, 7.30 m, and 8.60 m, with a consistent transport width of 3.00 m.
Weight: Varies based on configuration, ranging from 1,868 kg to 5,350 kg.
Power Requirements: Minimum to maximum power requirements range from 130 hp to 200 hp.
Number of Tines: Models come with 50, 60, or 70 tines.

Key Features

Turbo Discs: Two rows of Ø400 mm discs provide higher cutting capacity, vertical shallow work for weed management, and a 6° orientation for minimal disturbance.
Frontcutter Roller: Features hydraulic adjustment for increased residue cutting.
Tines: Five rows of Ø16 x 760 mm tines offer high capacity for managing large quantities of straw and residues, with independent setting of the 4th and 5th row angles for better finish and clearance.

Catalog excerpts

Your Dealer:

Open the catalog to page 1

Our company has developed a new range: «Top Soil Managements 2 to 5 cm. The TURBOMULCH® was design by AGRISEM to manage the surface residues. The machine can be used just after the harvesting to accelerate the decomposition of residues and equalize the straws. It used to manage weeds and crop regrowth in several passages. The machine can be used after seeding to improve the ground contact with seed. TURBOMULCH® also reduces the use of chemical products in agriculture.

Open the catalog to page 3

Two rows of Ø400 mm Turbo discs: Frontcutter roller: » Higher cutting capacity » Vertical shallow work for weeds management » 6° of orientation for very light disturbance » Hydraulic adjustment » Increased residues cutting Five rows of Ø16 x 760 mm tines: » High capacity to manage big strow and residues quantity » Independant setting of 4th and 5th row angle for better finish and for cl

Open the catalog to page 4

All AGRISEM International catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list