*myagriexpo

ACS14/EM

1 / 2 PagesView full catalog

ACS14/EM

Product catalog summary

Technical Specifications

Article: Ex relay module ACS14/EM
Article Number: 3080017
Purpose: Power supply for two ACC116 limit switches
Scope of Delivery: Module in a plastic housing for 35mm DIN rail mounting

General Information

Connections: 2 orange terminals for 15-30 VDC supply, 5 orange terminals for potential-free outputs, 8 blue terminals for limit switches
Installation: In control cabinets sized 400x250x200 to 600x400x200
Max. Surface Temperature: 85°C with thermal fuse

Housing

Material: Open plastic housing with grounding contact
Dimensions: 50 x 90 x 70mm (W x H x D)
Mounting Position: Vertical on a wall, max. vibration 5G
Fastening: Snaps onto a 35mm DIN rail

Electrical Data

Operating Voltage: 15 - 30VDC
Power: 2-Watt nominal
Intrinsically Safe Output: U: 12VDC / Iks: 585mA / Po max. 2.2W / Lo max. 0.5mH / Co max. 3uF
Ex Fuse: 125mAT, 35A SV as per IEC
Operating Status Indicator: Red LED for relay de-energized, Green LED for relay energized
Special Function: Remote adjustment using the blue button

Ambience

Environment: -20°C to +60°C
Process: -20°C to +60°C
Storage: -20°C to +60°C, max. 2 years
Pressure: 0.8 to 1.1 bar
Humidity: max. 95%, non-condensing

Safety Data

Device Protection Class: Protection Class I (must be grounded)
IP Protection Class: Module IP20, in control cabinet IP65
Zone Classification: Zone-free in control cabinet or Zone 22 for EExe enclosures
ATEX Approval: Partial certificate as associated equipment, Ex II (1) D [Ex taD] IIIC

Connection Diagram

Blue Sensor Input: Ground, Sensor 1 GND, Sensor Signal, Sensor 1 +U, Sensor 2 GND, Sensor 2 Signal, Sensor 2 +U
Orange Terminals: Supply +U, Supply GND
Outputs: Output 2 NC, Output 2 NO, Common, Output 1 NO, Output 1 NC

Catalog excerpts

Technical dataEx relay module ACS14/EM Article Agromatic AG, Goldingerstr. 30, 8637 Laupen, Switzerland, Tel: +41 (0)55 256 21 00, www.agromatic.com

Open the catalog to page 1

Safety data Device protection class IP protection class Zone classification ATEX approval Connection diagram Agromat ic Protection Class I (must be grounded) Module IP20, in control cabinet IP65 Zone-free in control cabinet or Zone 22 for EExe enclosures Partial certificate as associated equipment Ex II (1) D [Ex taD] IIIC for the operation of ATEX-certified limit Blue Sensor Input SA Sensor Signal +A Sensor 1 +U Orange Terminals Agromatic AG, Goldingerstr. 30, 8637 Laupen, Switzerland, Tel: +41 (0)55 256 21 00, www.agromatic.com

Open the catalog to page 2

ACS14/EM

ACS14/EM

Catalog excerpts

All Agromatic AG catalogs and technical brochures

Archived catalogs