High temperature sensors for special applications such as biomass, sewing sludge etc.
1Pages

High Temperature Measuringcable ATEX Z 20 (21, 22) High temperature measuringcables in length of 0.5 - 25m are used in critical, agressive bulk products or liquids. Applicationexample: sewage sludge silos, dried sewage sludge (granulate, pellets, cubes), silos and containers for granulates and powders, containers for liquids. The sensors are constructed for high temperatures as well as for high pressures. For the assembly DIN-flanges as well as standard 1 1/2" connectionheads are available. The measuring cables are produced according the the clients requirements with 1- maximum 16 temperature sensors. PT100, PT1000 and PT 10`000 sensors are available. Preferably PT10`000 is used in combination with the control unit ALT605. Sensorcables, diameter 4.5mm from AISI 316-W.1.4404/1 V2A MgO length 0.5 to 25m with one sensor in standard 2-wire switching, 3 or 4 wires on request. Sensors PT100/PT1000/PT10000* DIN (*standard). Max acceptable operating temperature product 285 ºC, max acc. sensortemperature 400ºC, Max acceptable temperature connectionside 180ºC. Sensors are soldered in cabletip, no bulges. Protectionclass IP66, ATEX zone 0,1 or 20, 21 Ex II 1/2D IP66 T290ºC/ Ex II 1/2 G* Included in delivery: attached press bolting. With more sensors these are assembled in one cable. Delivery as coiled cable. Included in delivery: operating manual Suspensionhead for 1-7 sensors of different length. Mounting thread 1 1/2" gas. Sensor connection via bolt clamps. Threaded insert for max. 7 process screw connections. (Unused are closed). Assembly: hexagonal nut SW60 Material: process connection: ASI316L-W1.4404/1.4435 V2A Connection housing: aluminium die cast, powdercoated with outer potential equalization connection. Zone separation Z 20 / 21 (22) or zonefree. Included in delivery: operating manual Connectionbox DIN flange DN80 (max 11 sensors, DN 100 (max 16 sensors) Sensor connection via bolt clamps. Threaded insert for max. 11(16) process screw connections. (Unused are closed). Material: process connection: ASI316L-W1.4404/1.4435 V2A. Connection housing: aluminium die cast, powdercoated with outer potential equalization connection. Delivery without flange screws. Zone separation Z 20 / 21 (22) or zonefree. Included in delivery: operating manual Installation and streching tool. The sensorcables are supplied in a coil. By means of this tool the cables can be streched. In addition the tool is used for integration and screwing of sensor process connections. Construction: Galvanized steel. Not included in delivery: please order separately. ALT605 control unit for 1 up to 10 temperature sensors with PT10`000 DIN sensors. Measuring range - 30 up to + 210 ºC, automatic, cyclic measurement, 4 adjustable limits, alarm output via relay connections, option: RS485 data output art. 5263, auxiliary voltage 24VDC. Digit display sensor and 3-digit temperature, digitheight 10mm. (see special datasheet) Sizes: 112 x100 x 70mm, DIN 35-rail, protectionclass Ex II (1D) IP20. Special constructions can be supplied, taking into account the valid Ex(ATEX) regulations. Right of technical and dimensional changes in the sense of process reserved at all times email: info@agromatic.com www.agromatic.com