Samplers - manual/automatic Product sampling for powdery and granular bulk material is a matter of trust. A sample is only representative if it represents an average of the product. For the solution of this problem we offer samplers with either manual or automatic operation for flowery products up to cubical bulk material with particle sizes of 12mm as a maximum. Manual: Manual samplers in two different lengths. Construction in light metal for easiest cleaning. Close the product sampler and stick it into the bulk material, turn the handle and the sampler will open. Due to the shifted order of the sampling slots the sample will represent a product avage. For the complete emptying of the sampler the handle has to be opened. For extensive cleaning the product sampler can easily be taken apart. Automatic sampler for fix installation : universal sampler ASP297 The universal sampler is available with product specific inlet pipes for powdery and granular products. Construction of product touching parts in stainless steel 1.4301, electro polished. Mounting flange pipe for welding in standard steel ST3712, primed and finishing vanish in RAL5015.Optional assembly. Motor with drive can be turned by 90°. Sampling screw open for cleaning on the face side. The shaft extension between outlet and drive is closed so that within the product sampler dead angles are avoided. Operation with the control ASP212/S guarantees best possible operation. 150 Motor: 3x230/400V/50Hz (others on request) screw speed 30 U/min Technical changes in the sense of technological progress reserved at all times ! email: [email protected] www.agromatic.c