Lobe Rotor Pumps Standard • Extreme Duty

A Secure Solution for Your Pump Tasks The AGM lobe rotor pump is a Danish designed and manufactured pump which gives you numerous unique advantages - also when pumping difficult liquids in a tough environment. • Dry mounted - better working environment • Compact design - flexible lay-out • Quick service - lower operation costs • Rigid components - reliable operation Standard the AGM lobe rotor pump is available in three sizes with a maximum flow of 80 m3 per hour. For particularly demanding pump tasks there is the AGM Extreme Duty with a maximum flow of 130 m3 per hour.

Pumps All the Difficult Liquids You can use the AGM pump for many different tasks with both clean and impure liquids, which traditionally cause problems. The AGM pump has been continuously developed through more than 20 years, and today it is being used to pump e.g. • Unfiltered waste water • Molasses and grease • Dewatered sludge • Offal and blood • Animal feed • Paint, glue and varnish • and much more Gentle Pumping Principle The AGM pumps are particularly well-suited for viscous liquid with a high dry matter content. The pumps are working by the displacement principle: Two rubbercoated lobes...

Quick and Easy Service Means Shorter Operation Stoppage The design of the AGM pumps helps you to avoid longer operation stoppage. Without dismantling the pump from the pipeline, it can be serviced and reconditioned using regular hand tools. You have full access to replace all wear parts just by removing 8 allen bolts. Comfortable Working Environment with Self-Priming Pumps When using the AGM pump, you get a nice and clean working environment around the pump. • Easy to service • No foot valve or vacuum system • More flexibility • Improved operational reliability • Self-priming up to 8 m vertical...

Individual Solutions The AGM lobe rotor pump can be installed and powered in many different ways, and can be used both as fixed or mobile pumps. We create customised solutions according to your needs. Also for Tough Environments Even in tough conditions the AGM pump works reliably. The pump consists of a minimum of components and joints. That makes it easy to keep it sealed from oli, sludge and dust. www.agrometer.dk • [email protected]

• Thoroughly tested • 3 sizes - same spare parts • Simple construction • DIN flanges for easy fitting • Small built-in dimensions • New more powerfull model for demanding jobs. • 2 sizes - same spare parts • Most spare parts identical to AGM Standard • DIN flanges for easy fitting • Small built-in dimensions • Twisted lobes reduces pulsation • 17-spline shaft increases stability AGM 95/1: Max. flow 28 m3/hour Max. pressure 10 bar DN 80 flange AGM 190/1 ED: Max. flow 65 m3/hour Max. pressure 10 bar DN 100 flange AGM 190/2: Max. flow 50 m3/hour Max. pressure 8 bar DN 100 flange AGM 380/2: ED Max....

Designed for Long Service Life, Reliable Operation and Low Costs There have been no compromises in the design of the AGM pump. Whilst the material selection makes it possible to solve very demanding tasks, the pump is also designed to lower your costs for maintenance. Since most wear parts in the different pumps are identical, it means you don’t need to stock complete spare part sets for all your pumps. The pumps service life is extended because the pump always operates calmly and steadily, also at high discharge pressures or with impure liquids. This is because the shafts have bearings in both...