Catalog excerpts
SLURRY SPREADING Efficiency | Consideration | Profit
Open the catalog to page 1Agrometer Slurry Spreading SRS 1200 Umbilical Slurry Injector SN 800 Arable Land Injector Subject to change without notice • September 2016
Open the catalog to page 2- without annoying your surroundings The latest slurry spreading technology, giving you the optimum utilisation of the nutrients in the slurry. Whilst being as considerate as possible for your surroundings. Better Nutrient Uptake You extend your slurry spreading period, when you use the Agrometer system. This gives your crops a better chance to absorb the important nutrients. This is due to the low self-weight of the machines, which enables them to drive on fairly wet soil, making it possible to enter the fields at an earlier stage than with a normal slurry tanker. If it is fluent - it can...
Open the catalog to page 3No Smell, No Road Soiling Your neighbours will barely notice when you spread slurry, even if you do it from early morning until late at night. This is because your machines operate in the fields all the time, so you don't have to drive around on the roads with smelly and dirty tankers. With the Agrometer system you have a capacity of up to 250 m3/hour of slurry applicated, subject to pump type and local conditions. Large savings on fuel, because the machines constantly operate in the fields. You can cover more than 50ha per set-up. The system can be operated by just one person. Large...
Open the catalog to page 4Principal Sketch: Remotely operated pump unit Remotely operated intermediate The slurry is pumped from the slurry storage to the spreader machine, which constantly The pumps have an operating range of 4 km. If you need to pump further than 4 km, you can do so by using one or more intermediate The slurry can be pumped through permanently buried pipelines, or through mobile hose systems which are laid out with The remotely operated pump units are monitored by a surveillance system, which terminates operation in case of hose- or pipe Subject to conditions, you can spread slurry on more than...
Open the catalog to page 5Large Quantities of Slurry With the SDS 7000 you get a thoroughly tested machine, which has been developed and optimised through more than 20 years. The slurry spreader works constantly in the field, because the slurry continuously is being pumped The SDS 7000 comes with a 24 or 30m dribble bar and 2 macerators. This ensures you have an even dosage across the full width of the dribble bar - also at the outermost hoses. Larger Hose = Larger Capacity You can increase your hourly capacity around 30-40 % by fitting the machine with 550m of 5" hose instead of the standard 650m of 4" hose. The...
Open the catalog to page 6Permanent Slurry Spreading The slurry is spread whilst driving both forth and back. When going back, the cabin is turned 1809 to give the driver a perfect view of the direction of A video camera ensures that you can always monitor the hose winding mechanism. When the system has been set up, most of the working day happens in the cabin. Therefore it has been designed to provide maximum comfort, and is equipped with air suspended seat and adjustable steering wheel, heat system and air condition, passenger seat, fridge and coffee machine, monitor with DVD player and a radio with CD player....
Open the catalog to page 72 x 40 hole horizontal macerators 045 mm dribble hose, distance between hoses 30 cm Individual blinding of dribble hoses: 22 - 20 - 18 - 16 m 2 x 48 hole horizontal macerators 045 mm dribble hose, distance between hoses 30 cm Individual blinding of dribble hoses: 28 - 24 - 20 m Working lenght: 650 m with 4" hose, 600 m with 4J4" hose or 550 m with 5" hose Propulsion: 4-WD, max. 12 km/hour (operation) Engine: John Deere Powertech 4045, 127 kW @ 2500 rpm Sauer-Danfoss hydraulics Propulsion speed is automatically adjusted to match the desired dosage Drive wheel: Radial tyres, Michelin Mega...
Open the catalog to page 8The Slurry Spreader of the Future! Propelled Slurry Spreaders The brand new SDS 8000 is the most ground- breaking model, since the initial introduction of the slurry spreader more than 20 years ago. The many new functions makes it possible to spread the slurry in an even more efficient way, but still while taking care of both nature and improving On the new SDS 8000 you will have some new functions that were never before available for self- propelled slurry spreaders: • Electro hydraulic hose winding control • Electrical tyre pressure regulation • Return pumping of slurry Subject to change...
Open the catalog to page 9Improved Efficiency With New Hose Crane Arm With an SDS 8000 you can process large fields than can be "split" about 10% faster than with a traditional self-propelled spreader. This is beacuse of the new hose crane arm, which enables you to drive a much more efficient pattern, which is not technically possible on the other With the crane arm you don't have to follow the track of the laid out hose, when reversing and This helps to save time, and also prevents overdosage around the turning points. From the starting point the spreader drives forward and turns left at track no. 1. When the...
Open the catalog to page 10Save Time With Easy and Fast Adjustment of Hose Coiling You are in total control of the hose coiling with the new electro hydraulic winding mechanism. Using the joystick in the cabin, you can move the point of coiling to any position on the hose drum, at any This means you can do instant correction of fault coiling. This saves you time, because you don't need to stop the slurry spreading and unwind the hose before correcting. The electro hydraulic winding mechanism is optional equipment. Cabin With Joystick Control The SDS 8000 has got Claas' latest cabin with joystick control, which makes...
Open the catalog to page 11Manually foldable at 24 m, hydraulically foldable at 30 m 7 or 8 macerators: 2 x 36 hole, 4 x 10 hole, 1x8 hole (2x8 hole when hose crane is mounted) 045 mm dribble hose, hose distance 30 cm Individual blinding of hoses: 24 - 30 - 36 m Hydraulic blinding of complete dribble bar wing (right or left) Working lenght: 650 m with 4" hose, 600 m with 4J4" hose, 550 m with 5" hose Electro hydraulic hose winding Engine: John Deere Powertech 6068, 181 kW - 2.000 rpm (max. 2.200 rpm) Sauer-Danfoss hydraulics Propulsion speed is automatically adjusted to match the desired dosage Canbus control Drive...
Open the catalog to page 12All Agrometer A/S catalogs and technical brochures
-
AGM Lobe Rotor Pomps
8 Pages
-
LONG-SHAFTED SLURRY PUMPS
4 Pages
-
CONTAINER PUMP
1 Pages
-
UMBILICAL INJECTOR SRS 1200
2 Pages
-
THE NEW GENERATIPN SDS 8000
8 Pages
-
AGM Lobe Rotor Pumps
8 Pages