THE NEW GENERATIPN SDS 8000
8Pages

{{requestButtons}}

Catalog excerpts

THE NEW GENERATIPN SDS 8000 - 1

THE NEW GENERATION The new SDS 8000 is the most ground-breaking model, since the initial introduction of the self-propelled slurry spreader more than 20 years ago. The many new functions make it possible to spread the slurry in an even more efficient way, while still taking care of both nature and improving the working environment. On the new SDS 8000 you will have some new functions that were never before available for self-propelled slurry spreaders: • Hose crane arm • Electro hydraulic hose winding control • Electrical tyre pressure adjustment • Return pumping of slurry

Open the catalog to page 1
THE NEW GENERATIPN SDS 8000 - 2

LIQUID MANURE APPLICATION TYRE PRESSURE ADJUSTMENT Optionally the SDS 8000 can be fitted with a tyre pressure adjustment system. This enables you to deflate or inflate the tyre from the cabin. Reducing the tyre pressure makes it easier to operate on muddy fields, because the tyre shape will be more oblonged, giving you a better ”road grip”. It also helps to reduce the soil pressure each cm2. TIME SAVING REMOTE SUPPORT The slurry spreader can be equipped with a modem for remote support. In case of operation failure, Agrometer can access the machine control and view error codes and operation...

Open the catalog to page 2
THE NEW GENERATIPN SDS 8000 - 3

From the starting point the spreader drives forward and turns left at track no. 1. When the machine has turned 90º at point A, it reverses completely to the right end of the track. From here it goes forward completely to the other end (left) of the tramline. Then again it reverses towards right, but only until the middle. From point A it turns to track no. 2, and continues reversing to the right. From here it goes forward completely to the left. Then it reverses to the right until point B, where it turns to track no. 3, and from there it reverses completely to the right. And so forth, until...

Open the catalog to page 3
THE NEW GENERATIPN SDS 8000 - 4

LIQUID MANURE APPLICATION IMPROVED EFFICIENCY WITH NEW HOSE CRANE ARM With a SDS 8000 you can process large fields that can be ”split” about 10% faster than with a traditional self-propelled spreader. This is beacuse of the new hose crane arm, which enables you to drive a much more efficient pattern, which is not technically possible with the other spreaders. With the crane arm you don’t have to follow the track of the laid out hose, when reversing and coiling up the hose. This helps to save time, and also prevents overdosage around the turning points.

Open the catalog to page 4
THE NEW GENERATIPN SDS 8000 - 5

SAVE TIME WITH EASY AND FAST ADJUSTMENT OF HOSE COILING You are in total control of the hose coiling with the new electro-hydraulic winding mechanism. Using the joystick in the cabin, you can move the point of coiling to any position on the hose drum, at any time you like. This means you can do instant correction of fault coiling. This saves you time, because you don’t need to stop the slurry spreading and unwind the hose before correcting. The electro hydraulic winding mechanism is optional equipment. EMPTYING THE SUPPLY HOSE CABIN WITH JOYSTICK CONTROL You can fit the SDS 8000 with an air...

Open the catalog to page 5
THE NEW GENERATIPN SDS 8000 - 7

THE WELL-KNOWN With the SDS 7000 you get a thoroughly tested machine, which has been developed and optimised through more than 20 years. The slurry spreader works constantly in the field, because the slurry continuously is being pumped directly to the machine. The SDS 7000 comes with a 24 or 30m dribble bar and 2 macerators. This ensures you have an evenly dosage across the full width of the dribble bar – also at the outermost hoses. LARGER HOSE - LARGER CAPACITY You can increase your hourly capacity around 30–40% by fitting the machine with 550m of 5” hose instead of the standard 650m of...

Open the catalog to page 7
THE NEW GENERATIPN SDS 8000 - 8

LIQUID MANURE APPLICATION When the system has been set up, most of the working day takes place in the cabin. Therefore it has been designed to provide maximum comfort, and is equipped with air suspended seat and adjustable steering wheel, heat system and air condition, passenger seat, fridge and coffee machine, a radio with CD player and an Ipad. PERFECT VIEW The slurry is applied whilst driving both forth and back. When going back, the cabin is turned 180º to give the driver a perfect view of the direction of travel. A video camera ensures that you can always monitor the hose winding...

Open the catalog to page 8

All Agrometer A/S catalogs and technical brochures