Automatic Bale Wrapper Agronic 1022 / 1025 The Agronic 1022/1025 wrappers are designed for long-term use. All joints are greasable, and slide bearings feature replaceable bushings. Hydraulic motors are sourced from OMR and have a long lifespan. Hydraulic oil is supplied only as required for operation, so it does not excessively heat the oil from the tractor's hydraulic system.

AGRONIC 1022 Bale loading height is low, and transport of 2 bales, while wrapping one, means that these are some of the most efficient wrappers on the market. Wrapper control is done by an in-cabin CANBUS system designed and manufactured in Finland. Wrapping functions are completely automatic, with the operator only giving the command to pick-up and drop-off bales. CANBUS system features: - Bale memory for up to 50 individual clients. - Operating modes and information displayed on the screen at all times. Thanks to the security of the operating system, the machine can not be operated incorrectly...

Loading works automatically: When the bale is ready for loading on the wrapping table, the driver presses the actuator button on the control panel, and the bale drops the chamber into the path of the loading forks. In this case, the bale wrapper is activated by pressure against the loading arm switch. The incoming bale is loaded on to the table, and the automatic wrapping cycle begins. During the cycle, the bale is wrapped set the pre-programmed number of film layers. The film is then automatically cut at the end of the cycle. After this, the driver can either drop a bale or load for second bale...