Feeder wagon Agronic 143S 4wd A compact feeder wagon with low power consumption. Suitable for round bales and block silage. The Agronic 143S self-loads the bale or block silage and feeds to both sides. Slices of any size can be cut, and the chop length is always perfect. The wagon is light and easy to maneuver. All functions are hydraulically operated and controlled via two joysticks apart from the conveyor and double pump which are controlled via pedals. All hydraulic functions can be used independently. Skid steer. Direct drive hub motors in all four tires. Because all four tires have traction, the wagon has excellent all-terrain capability. The wagon can also be used for transferring a feed cart or cleaning the feeding table.

The bale sits on the lift for the duration of the entire work stage. The lift height also determines the length of the chop. Due to the special structure of the lift, the bale can also be removed if necessary. Additional forks are also available for the lift to facilitate handling of loose feed. The length of chop can be adjusted. The horizontal chopping knives can cut the bale into up to six slices. Even frozen feed can be cut. The four-wheel drive is controlled via joysticks. The system is equipped with a differential control valve which acts as a lock for the differential gear. This makes...

The engine compartment can be opened without any tools for daily checks. The engine with its accessories are situated in a sheltered, but well-ventilated engine compartment which prevents e.g. feed from getting in. Also animals are safe from any hot parts. The block heater is standard equipment. 3790 The side conveyor is controlled via the left pedal. Pressing the right pedal directly activates the double pump. The main switch and exhaust pipe are protected. The control panel is equipped with an ignition key, hour meter and engine monitoring system. The main switch is standard equipment. Agronic...