The most powerful felling crane

The FÄLLBACH was developed as an overall concept especially for felling operations. The interaction between safety, high load capacities and easy handling is unique in this class. The grapple itself offers a secure hold with high holding force due to its special grapple and tooth geometry, twisting or even tilting of the log is not possible. The FÄLLBACH meets the individual requirements of felling operations every day in practical use. Equipped with a powerful chain saw (100HP), speedy cuts even through 75cm thick logs are no problem. Optionally, the saw can be equipped with 0.404“ or ¾“ pitch,...

5 Customized cylinders and chain hoists ensure high speeds and load cycles. Thanks to the use of high-strength fine-grain structural steels and a special geometry, the telescoping system achieves maximum bending and torsional rigidity. In addition to central lubrication, all sliding linings in the telescope, from the outside, have a lubrication connection. nt Efficie work – d confine in s p ac e i Use in confined spaces The FÄLLBACH offers the possibility to turn the upper carriage within the vehicle width. It is also possible to support it within the width of the vehicle. This allows an application...

TECHNICAL DATA Chassis GROVE GMK 3060 3-axle with 4-point support Dimensions Length m 10,75 Width m 2,55 - 2,85 m (depending on tires) Weight t 30 - 36 (depending on equipment) Superstructure: ■ 360° endless rotatable ■ Hoisting winch ■ Hydraulic quick coupler on the telescopic tip 3-section telescope Extension and retraction speed of attachment: approx. 0,75m/s Extension and retraction time to max. reach: 15sec. 5-section telescope Extension and retraction speed of attachment: approx. 1m/s Extension and retraction time to max. reach: 20sec. Precipitation unit: Max. Grapple opening: 1,05m 360°...

Gebruder Bachmaier Landmaschinen GmbH Schlierstr. 20 D-85088 Menning Phone: +49 (0)8457 - 93 46 88-0 E-Mail: [email protected]