Overview The Albutt Pallet Fork Positioner allows users to quickly and accurately move pallet forks from the comfort of the cab. By operating a hydraulic service, the forks can move to suit various pallet sizes and loads - ideal for busy yards and construction sites where getting out of the cab can create a health and safety issue. The Albutt Fork Positioner can be bought complete with pallet forks or can take OEM forks for specific machines. The range is made up of 3 models -P410HFP (4.1 tonne capacity), P1200HFP (12 tonne capacity) and P1800HFP (18 tonne capacity). All models are load tested and supplied with the test certificate. Features • Accurate fork positioning, control position of pallet forks from the cab Excellent visibility, strength and versatility Spill Guard Nylon bushes 4.1 tonne lift capacity Single Bar - Floating Available with JCB Q Fit, Merlo, Manitou or Pin and Cone Brackets Road transport fork retainers Available with or without Pallet Forks Forks open to 1100mm (outside) Forks close to 385mm (outside) Robin Normington. 07778942138 |[email protected] Dan Cross. 07720087264|[email protected] www.albutt.co.uk