*myagriexpo

10HP

Product catalog summary

Product Overview:
The document provides technical specifications for the 10HP series multi-turn potentiometers, specifically models 10HP-5 and 10HP-10. These are wirewound potentiometers designed for precision applications, with the 10HP-5 being a 5-turn model and the 10HP-10 a 10-turn model.

Specifications:

Resistance Range: 100Ω to 20kΩ for both models, with a maximum practical resistance of 50kΩ for 5-turn and 100kΩ for 10-turn.
Total Resistance Tolerance: Standard Class ±3% (H), Precision Class ±1% (F).
Independent Linearity Tolerance: Standard Class ±0.35% for 5-turn and ±0.25% for 10-turn; Precision Class ±0.2% for 5-turn and ±0.1% for 10-turn.
Power Rating: 0.5W for 5-turn and 1.0W for 10-turn.
Noise: Within 100Ω E.N.R.
Electrical and Mechanical Travel: 360º Xn ±5º for electrical travel and 360º Xn +30º for mechanical travel, where n is the number of turns.
Insulation Resistance: Over 100 MΩ at 500 V.D.C.
Dielectric Strength: 1 minute at 500 V.A.C.
Torque Specifications: Starting torque within 3mN∙m, stopper strength approx. 0.1N∙m, and max. torque for mounting nut within 1N∙m.
Max. Working Voltage: 450 V.
Resistance Temperature Coefficient: ±20p.p.m./ºC.
Mass: Approx. 17g for 5-turn and 20g for 10-turn.

Additional Features:

Special specifications include a 3-turn type (S10HP-3), lower resistance values (20Ω, 50Ω), and various shaft and bushing customizations.

Contact Information:
Althen provides contact details for various regions including Germany, Benelux, France, Sweden, USA/Canada, and other countries for inquiries and support.

Catalog excerpts

Multi turn potentiometer 10HP Wirewound (Bushingmount) ALTHENSENSORS & CONTROLS 10HP Model 10HP-10 World's smallest 10-turn pot. 10HP-5 19.2 Note: 1 pc. inner teeth washer and 2 pcs. hex nuts are attached ■ Standard Model Nos. 10HP-5 (5-turn) ■ General Specifications 360° Xn ±5° (n: No. of turns) 360° Xn +3 [I °n: No. of turns) Over 100 MQ at 500 V.D.C. 1 minute at 500 V.A.C. Within 3mN-m (30gf^cm) Approx. 0/IN^m (Ikgf^cm) Standard Resistance Range: Max. Practical Resistance Value: Total Resistance Tolerance: Independent Linearity Tolerance: Power Rating: Noise: Standard Class Precision Class (within 5kQ) 0.5W (5-turn) 1.0W (10-turn) Within 100Q E.N.R. Electrical Travel: Mechanical Travel: Insulation Resistance: Dielectric Strength: Starting Torque: Stopper Strength: Max. Torque exerted on fastening the mounting nut to the bushing: Max. Working Voltage: Resist. Temperature Coefficient of Wire: Mass:

Open the catalog to page 1

SENSORS & CONTROLS ■ Standard Resistance Values | No. Of Wire Turns | Resistance Wire Used Resist. Value (0)__100__200 500 1k 2k 5k__10k__20k 50k 100k Ni-Cr System Resist. Wire Used Cu-Ni System Note: Mark shows value at special higher practical resistance ■ Special Specifications Available 3-turn type (S10HP-3), lower resistance values (20Q, 50Q), shaft dia. (03.175mm) • bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length). The information provided herein is to the best of our knowledge true and accurate,...

Open the catalog to page 2