Turning-counting dials potentiometer MF Analog Readout Standard dimensions Model MF10-15XB Model MF10-15XBD (without flexible coupling) Panel Arrangements Model MF10-15YB Model MF10-15YBD (without flexible coupling) hole Fixing screw Note: The dimensions of mark are determined by the potentiometer to be mounted.

SENSORS & CONTROLS ■ Special Specifications Available Flexible coupling incorporated MF dial is provided with a flexible coupling situated between te shaft of the potentiometer to be mounted and inner dial knob and therefore, the connection is entirely free and only the force of rotating direction is transmittable. With such unique device, traditional trouble such as irregular rotation and ununiform torque due to inaccurate mounting of the potentiometrer on dial can be easily solved. Even the unskilled can mount this MF dial and you can save the labor cost using this MF dial. Note: When rotating...

SENSORS & CONTROLS The mounting adaptor as well as specially shaped nut only for use with Model MF Series Dials and Helicalohm pot. are fixed on the panel according to the illustration given above. The shaft of the Helicalohm pot. is turned anticlockwise to its limit and is put into the mounting hole of the dial which was already set at "0". At the same time, 4 projections of the mounting adaptor are inserted in 4 receiving holes prepared on the base plate of the dial and then all parts should be pressed to the panel firmly to eliminate any space. The shaft of the potentiometer is fixed by the...