HE1 Series Finger joystick ALTHEN SENSORS & CONTROLS Finger joystick ^ Features • Over 20 handle options and 6 mounting options • With contactless hall effect sensor technology • Compact design (under 25mm below panel depth) • Available in 1, 2 or 3 axis configurations • Protection up to IP67 grade • Pre-programmed proportional analog output or USB • Cable included with mating connector & pigtail wires ^ Applications • Chest controllers • CCTV systems • Medical instruments • Material handling equipment • Robot operations • Crane operations ^ Description This all-purpose finger-operated joystick comes with many different mounting and handle options to choose from. The operating principle is based on contactless hall effect technology which has a long life expectancy due to the absence of mechanical contacts. The HE1 joystick has an excellent return to centre accuracy and many pre-programmed electrical output options, including analog voltage, USB and Cursor Control. It is perfect for applications where the below panel space is limited due to its shallow profile and has an optional metal threading for easy mounting. Depending on the handle, the environmental protection is tested up to IP67. The USB output option is installed by plug & play and can operate as a standard USB 1.1 HID-compliant device without the need to install additional software. Cursor Control is also available, which is achieved by the joystick's microprocessor. Angle Of Movement Expected Cycle Life Centering Max. Vertical Load Max. Horizontal Load Material * Measured 44,5 mm (1.75") Above Panel Surface 40° (20° Each Direction) 5 Million Spring Return 333 N (75 lbF) 133 N (30 lbF) * Glass/Mineral Filled Nylon Angle 90° (45° Each Direction) Centering Spring Return Max. Applied Torque 1,58 Nm (14 lbFin)

Finger joystick ALTHEN SENSORS & CONTROLS ^ Specification ELECTRICAL Sensor Type Resolution Supply Voltage Output Voltage Return To Center Voltage Overvoltage Max. Reverse Polarity Max. Hall Effect 12 Bit 5VDC ± 0.01VDC See Options ± 50MV 20VDC -10VDC ENVIRONMENTAL Operating Temperature Storage Temperature IP Sealing Above Flange Emc Immunity Level Emc Emissions Level Esd Immunity Level Vibration Testing Mechanical Shock HIROSE DF11-12DP-2DS(24) CONNECTOR (ANALOG) * Extended Testing Levels USB Male Type A to Right Angle Mini B 1,50 m (5Ft) Length (Mini B to Joystick) CURSOR CONTROL OUTPUT OPTION:...

Finger joystick Product Configuration Guide OUTPUT OPTION: Square (☐) Round (○) Guided Feel (☐/+) X Axis Limiter (−) X Axis 3 Position (Left, Center, Right) Y Axis Limiter (L) HANDLE OPTION: 2 Axis No Button 2 Axis 1 Button 2 Axis No Button Skirt 2 Axis 1 Button Skirt 2 Axis No Button Thumb Stick* 2 Axis No Button Knurled* 2 Axis Ball Handle MOUNTING OPTION: A Drop-In Std. Square Bezel B Drop-In Squarebezel HANDLE COLOR: BK Black GY Grey (No Hardware Above Panel) C Drop-In Round Bezel D Rear Mount E Metal Threaded Housing (No Hardware Above Panel) F 30 3 Axis No Button Standard Z 31 3 Axis 1...

Finger joystick Handle Options: 2 Axis All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches). * Handle Options “24“ & “25“ Fit Threaded Housings Only (Housing Options “E“ Or “F

Finger joystick Handle Options: 3 Axis (Standard Z Axis) & 2 Axis with locked Z handle Dimensions in millimeters (inches). 9,91 (0.39)

Finger joystick Handle Options: 3 Axis (Low Profile Z Axis) & 2 Axis with locked Z handle Dimensions in millimeters (inches). Ø 16,25 (Ø 0.64)

Finger joystick Handle Options: 3 Axis, Slim Z Axis Dimensions in millimeters (inches).

Finger joystick Mounting Options Dimensions in millimeters (inches). DROP-IN SQUARE PANEL DIMENSIONS (OPTION A) 35,56 (1.40) DROP-IN SQUARE PANEL DIMENSIONS (OPTION B) 35,56 (1.40) DROP-IN SQUARE BEZEL, UNDER PANEL SCREWS 05.2019  |  version 0001 DROP-IN STANDARD SQUARE BEZEL

Finger joystick Mounting Options Dimensions in millimeters (inches). DROP-IN ROUND PANEL DIMENSIONS (OPTION C) REAR MOUNT PANEL DIMENSIONS (OPTION D) REAR MOUNT DROP-IN ROUND BEZEL

Finger joystick Mounting Options Dimensions in millimeters (inches). METAL OR PLASTIC THREADED HOUSING PANEL DIMENSIONS (OPTION F / OPTION E) 20,32 (0.80) PLASTIC NUT SUPPLIED ALUMINUM NUT SUPPLIED METAL THREADED HOUSING (OPTION E) The information provided herein is to the best of our knowledge true and accurate, it is provided for guidance only. All specifications are subject to change without prior notification. Althen Controls – Your expert partner for customized joystick controllers, footpedals, and position feedback sensors. Althen stands for high quality solutions, flexibility in customization,...