HE3 Series
11Pages

{{requestButtons}}

Catalog excerpts

HE3 Series - 1

HE3 Series Finger joystick ALTHEN SENSORS & CONTROLS Finger joystick ■ Features • Delivery within 2 weeks • Suitable for harsh environments (all configurations are IP67 sealed) • Dual independent electrical outputs per axis for safety-critical applications • Robust stainless steel shaft and brass X/Y mechanism • With contactless hall effect sensor technology • Pre-programmed proportional analog output or USB • Available in 1, 2 or 3 axis configurations • Cable included with mating connector & pigtail wires Applications Marine and offshore control Mobile hydraulics Chest controllers Industrial vehicles Robot operations Crane operations ■ Description This is the most reliable finger-operated joystick in our HE series. It is developed for safety-critical applications with dual independent hall effect sensors implemented on each axis. All models are minimum IP67 sealed and give the peace of mind necessary to get the job done. Just like the HE2 series, the mechanism is constructed from a robust stainless steel shaft and brass X/Y mechanism. The electrical analog output options and configurable to your liking and applicable mounting hardware and electrical able are supplied with each unit. ■ Specification Angle Of Movement Expected Cycle Life Centering Max. Applied Force Material 40° (20° Each Direction) 5 Million Spring Return 667 N (150 lbF) Glass/Mineral Filled Nylon Angle Centering Max. Applied Torque 90° (45° Each Direction) Spring Return 1,58 Nm (14 lbFin)

Open the catalog to page 1
HE3 Series - 2

Finger joystick ALTHEN SENSORS & CONTROLS ■ SpecificationELECTRICAL Hall Effect 12 Bit 5VDC ± 0.01VDC See Options ± 50MV 20VDC -25VDC SensorType Resolution Supply Voltage Output Voltage Return To Center Voltage Overvoltage Max. Reverse Polarity Max. ENVIRONMENTAL Operating Temperature -40°C to 85°C (-40°F to 185°F) IP Sealing Above Panel IP67 Standard Emc Immunity Level EN61000-4-3 *Compliance To 30A/m Esd Immunity Level EN61000-4-2 *Compliance To ±15kV/±8kV Vibration Testing Per SAE J1455 Section 4.9 & MIL-STD810G 514.6 Mechanical Shock Per SAE J1455 Section 4.10 & MIL-STD-202G WIRE COLOR...

Open the catalog to page 2
HE3 Series - 3

Finger joystick ALTHEN SENSORS & CONTROLS ■ Product Configuration Guide HE3SERIES LIMITER OPTION: S SQUARE(□) G GUIDED FEEL ( □/+ ) HANDLE COLOR: BK BLACK GY GREY HANDLE OPTION: 20 2 AXIS NO BUTTON LOCKED Z 21 2 AXIS 1 BUTTON LOCKED Z 22 2 AXIS 2 BUTTON LOCKED Z 23 2 AXIS BALL HANDLE 24 2 AXIS TAPERED HANDLE 25 2 AXIS 1 BUTTON TAPERED MOUNTING OPTION: A DROP-IN STD. SQUARE BEZEL B REAR MOUNT SPRING FORCE: (BLANK) STANDARD 1 +35% (X,Y,Z)

Open the catalog to page 3
HE3 Series - 4

HE3 Series Finger joystick Handle Options: No button handle All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 4
HE3 Series - 5

HE3 Series Finger joystick Handle Options: 1 button handle All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 5
HE3 Series - 6

HE3 Series Finger joystick Handle Options: 2 button handle All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 6
HE3 Series - 7

HE3 Series Finger joystick Handle Options: Ball handle, no button All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 7
HE3 Series - 8

HE3 Series Finger joystick Handle Options: Axis tapered handle, 1 button All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 8
HE3 Series - 9

HE3 Series Finger joystick Handle Options: 2 axis tapered handle, no button All handles available with any mounting option unless otherwise specified. Dimensions in millimeters (inches).

Open the catalog to page 9
HE3 Series - 10

HE3 Series Finger joystick Mounting Options Dimensions in millimeters (inches). REAR MOUNT PANEL DIMENSIONS 41.27 (1.625) THRU 4X 4X #4 FLAT HEAD SCREW, SUPPLIED 73.66 (2.90) REF. 2 BUTTON HANDLE REAR MOUNT OPTION

Open the catalog to page 10
HE3 Series - 11

Finger joystick ALTHEN SENSORS & CONTROLS Mounting Options 4X #6 MACHINE SCREW, SUPPLIED DROP-IN PANEL DIMENSIONS (FOR REFERENCE) 84.71 (3.335) REF. 2 BUTTON HANDLE The information provided herein is to the best of our knowledge true and accurate, it is provided for guidance only. All specifications are subject to change without prior notification. Althen Controls - Your expert partner for customized joystick controllers, footpedals, and position feedback sensors. Althen stands for high quality solutions, flexibility in customization, and is known for its long experience. Please visit our...

Open the catalog to page 11

All Althen Sensors and Controls catalogs and technical brochures

  1. MB

    2 Pages

  2. MA

    1 Pages

  3. DA10-24B

    3 Pages

  4. OF46HD-10

    2 Pages

  5. OFCP50

    1 Pages

  6. OF50

    1 Pages

  7. OF30

    1 Pages

  8. 46HD

    3 Pages

  9. 22HP

    2 Pages

  10. 20HP

    2 Pages

  11. 10HP

    2 Pages

  12. 12HP

    2 Pages

  13. Model 200FCW

    2 Pages

  14. HE2 Series

    9 Pages

  15. HE1 Series

    10 Pages

  16. TS2 Series

    3 Pages

  17. TS1 Series

    5 Pages