Model 200FCW
2Pages

Catalog excerpts

Industrial foot pedals H80FCL Incorporated Potentiometer with a hall effect IC type resistive element S Means special mechanical specification not applicable to our standard. In case we produce customized product, we add4-digit branch number. With kick-down device: The operating force is increased at 5° from the end of the stepping. H Means hall effect IC type potentiometer is incorporated 1 Number of switches to be incorporated (Option). means approx. size of base housing in mm. 1--1 switch incorporated. 2--2 switches incorporated. 2 Rating of switch : D ∙ F. -- Micro-switch FCL Means Foot Controller. L means small and compactsized pedal type Output characteristic: S--single output X–dual cross output P–dual parallel output Standard Dimensions 4 positions mounting holes. Ø6.1 hole

Open the catalog to page 1

Standard Specifications Electrical Performance Hall effect IC type potentiometer is incorporated: SHSM18E, hall effect IC type single-turn contactless potentiometer. - applied voltage: 5V±10% D.C - output range: Approx. 10%~90% Vin - Independent linearity tolerance: ±3% Dielectric strength: 1 minute at 250 V.A.C. Insulation resistance: over 100MΩ at 250V.D.C. EMC durability: 100V/m(80Mhz~1Ghz 1Khz sine-wave 80%AM modulation ESD durability: ±8 KV contact ±15KV aerial discharge Mechanical Performance Operating method : Stepping pedal type Operating angle : Approx. 20° Operating force :...

Open the catalog to page 2