MIXER ALTINBILEK brand Mixers are industrial machines that provide a homogeneous mixture of dry raw materials in ground powder form, vials, wastes or grains in grain form. It is produced in various mixing volumes between “200 - 18.000” liters, in padded and helical models depending on the usage situation and demands. It is designed with single shaft and double shaft options. These mixers which are used in the feed, flour, chemical and recycling industries, provide high homogeneous mixing results in a minimum of time through their unique rotor and body structure. Thanks to the innovative design of the mixing rotor, when the appropriate system flow rate is achieved, it can mix 10-20 times per hour at a mixing ratio of 1: 100,000 with a variation coefficient (CV) of 1.5% - 5%. Thus, maximum efficiency is provided in the areas where the products are used. Through the special entry points and nozzles on the mixers, oil, water and various liquid additives can be injected into the product that is mixed equally and evenly. For solid raw materials in powder form such as premix, there are flange-connected, wide-section entrance sections. After the mixing process, the bottom covers that can be opened completely prevent residue formation in the mixer and the discharging process takes place in a very serial manner. There is an air by-pass line on the mixer to ensure the air circulation control that occurs during the entry and discharge processes. FEATURES Reinforced Structure High Strength Special Circular Design Minimum Mixing Time Perfect Mix with High Homogeneity Superior Capacity Performance High Production Capacity Short Downtime Effective Sealing Elements Heavy Duty Block Bearings Easy Use and Maintenance DRIVE SYSTEM Geared Motor Direct Coupled and Belt Pulley Connection Power Transmission Options IE3 Class High Efficiency Electric Motor (IE4 - Optional) SECURITY SYSTEM Safety Sensor on Covers Bearing Heat Detection Sensor (Option) ACCESSORIES Wide Maintenance and Intervention Covers Air By-Pass Channel Balanced Distribution with Liquid Inlet Nozzles Angle Adjustable Paddles Electro-Pneumatic Controlled Product Entry Cover Drain Cover Locking System

INLET GİRİŞ ÇIKIŞ OUTLET OUTLET ÇIKIŞ Efective -Total Volume (m³) The designs and dimensions may be modified without notice.