ED
16Pages

{{requestButtons}}

Catalog excerpts

ED - 2

Micro plus pneumatic micro-granular applicator Hydraulic singling drive on ED Super Large seed hoppers Model overview Number of sowing units

Open the catalog to page 2
ED - 3

For any application, the right machine and the right specification can be individually assembled from the extensive programme. The combination of either front hopper, or rear fertiliser hoppers for mineral fertiliser make for efficient Electric fertiliser drive on the ED Super Large fertiliser hopper up to units designed for professional operation. All supplied from the one source. Both the optimum component matching and service, therefore, is always ensured. State of the art technology for a better working performance The ED precision air seeder scores with its precise seed placement and...

Open the catalog to page 3
ED - 4

Classic and Contour sowing units For the optimum accuracy of work and exact placement Classic sowing unit Contour sowing unit AMAZONE sowing units have been uncompromisingly designed for high precision yet low maintenance. The easy handling saves start up times and increases the work rate. The sowing units are individually equipped with 60 l seed hoppers. For machines with Profi electronics, a fill level check is available. The AMAZONE Contour sowing unit is ideally suited to both mulch sowing and when working after the plough. The outstanding feature of the AMAZONE Contour sowing unit is...

Open the catalog to page 4
ED - 5

Classic and Contour sowing units ED Contour sowing unit with additional seed press roller Contour sowing unit – smooth running for precise placement The Contour sowing unit is guided via a longitudinal tandem, supported at the front by a one-sided press roller and at the rear by a V-press roller or Farmflex tyres. In this way the influence of the ground contours on the smooth ride of the unit is significantly reduced. Clods do not make the unit jump but it smoothly runs over them. So, any change in placement depth due to an uneven soil surface is minimised. The front press roller has been...

Open the catalog to page 5
ED - 6

Singling Precise, safe, simplest adjustment Vacuum principle of the singling system Stripper fingers Inspection hole Reduction flap Emptying flap Emptying flap for residual amounts AMAZONE precision air seeders function according to the vacuum principle. The mechanically (ED Special) or hydraulically (ED Super) driven singling of the grains is carried out via a stripper finger which offers considerable advantages as it is virtually independent of forward speed and seed shape. The unique feature of the AMAZONE precision sowing units is the singling disc. The seeds are drawn by vacuum on to...

Open the catalog to page 6
ED - 7

High-quality plastic components and optimum sealing High-quality plastic components made from different materials pair together and are responsible for the superb sealing between the vacuum chamber and the singling disc. This pairing together of different materials guarantees a long service life with optimum sealing. The AMAZONE stripper finger design is of particular advantage because it can easily be adjusted. Only 5 steps are quite sufficient to achieve the optimum position. The stripper finger adjustment has been proven to be insensitive to seed shape and speed with 85 % of all maize...

Open the catalog to page 7
ED - 8

Precise placement For the highest yields and work rates After the contactless fall of the seed from the disc, the secondary ejector ensures that the raised holes are absolutely clear. The design of the seeding mechanism results in a low drop height of only 100 mm on the Classic and 140 mm on the Contour unit which is an important pre-condition for the precise seed placement. 140 mm A large variety of singling discs make possible the sowing of maize, sunflowers, rape, sugar beet, millet, cotton, etc. For each crop there are at least 2 singling discs with different hole sizes available for...

Open the catalog to page 8
ED - 9

Precise seed placement | Tailored press rollers Tailored press rollers Safe coverage of the seed V-press rollers Fertiliser coulter Sowing coulter with cutting disc, Furrow former with seed channel, Seed press roller, V-press rollers of different sizes are available for equipping the sowing units. They are potentially used for the mulch sowing of maize and sugar beet. Via the adjustment of the press angle, the opening angle and the opening width, the V-press rollers can be optimally adapted to the prevailing soil conditions. V-press rollers allow the optimum operation with and without...

Open the catalog to page 9
ED - 10

Equipment that fascinates! For efficiency with comfort Hydraulic variants Depending on the choice made, the hydraulic system is available in three versions. There is the entry-level standard hydraulics, where every function has to be actuated from the spool valve on the tractor. On modern tractors with sufficient spool valves, this equipment level might be sufficient. For tractors with a limited number of spool valves, the Comfort hydraulics can be selected. Here the functions of wing and track marker folding can be combined via an electric changeover valve supplied by one spool valve. For...

Open the catalog to page 10
ED - 11

Equipment that impresses LED work lights Good visibility after dark is offered by the optional LED work lights attached on and in the fertiliser hopper, lighting both the operating area and also the interior of the fertiliser hopper. Micro plus micro-granular applicator AMAZONE offers the possibility, to equip the ED with one or two Micro plus micro-granular applicators enabling the simultaneous application of up to two micro-granules along with the seed during one pass in the field, depending on the machine type. Depending on the preference, the granules can be applied at two different...

Open the catalog to page 11
ED - 12

Fertilising For that perfect plant growth Fertiliser equipment For metering the fertiliser, the ED Special is equipped with a mechanical drive, whereas the ED Super has an electric system. With the electric drive, the fertiliser rate can be also variably matched on the move. Via the new loading board, the fertiliser hopper is easily and safely accessible. In conjunction with the electric metering drive, the calibration button is standard at the ED Super. For the continual fill level check, the fertiliser hopper is equipped with large sight glasses at the front and rear. In addition, also an...

Open the catalog to page 12

All AMAZONEN-WERKE H. Dreyer GmbH & Co. KG catalogs and technical brochures

  1. ZA-M

    24 Pages

  2. ZG-TS - ZG-B

    72 Pages

  3. Cenio

    8 Pages

  4. Catros

    68 Pages

  5. EDX

    28 Pages

  6. D9 AD

    32 Pages

  7. ZA-X Perfect

    1 Pages

  8. TYROK

    1 Pages

  9. Cayena

    20 Pages

  10. ZA-TS ZG-TS

    44 Pages

  11. KE/KX/KG/TL/KW

    48 Pages

  12. Cirrus

    32 Pages

  13. Leaflet Cenius

    36 Pages

  14. Leaflet ZA-V

    32 Pages